removal

So i searched the threads and couldnt find any involving wing removal techniques. What Im specifically looking for is somebody who has done the job with good results that could share some knowledge. Id like to fill the holes and touch up paint if possible saving the costs of painting the whole...

I have been following the steps in the DIY post from CyborgGT on Nov 3, 2015 to remove the knock sensor. I have disconnected all electrical and hoses. I have removed the 3 10mm bolts on each end of the top brace and the 2 10mm bolts holding the AC line and the plastic snorkel to the air cleaner...

If i remove the valve cover, can the spark plug tubes be removed? I have a spark plug that melted on the top ceramic and broke and i'd like more access to clean it up and remove the plug. I looked in the manual, but didnt see a task for it.

I'm looking at replacing the rear quarter panel on my RSX. It has a big rust hole on the bottom, rust spot above wheel well, and pretty good sized dent at the corner where tail light is. If it was just one of these things I'd attempt fixing/patching the control panel, but at this point I think...

Decided to install some ktuned inner tie rods to correct toe issues I was having with being lowered. The ktuned are adjustable inner tie rods meaning you can adjust the length to either bring your toe in or push it out getting your tires straight. It is a common problem for people who lower...

Need to replace the exhaust system after CAT, but the connection where CAT meets the pipe B is rusted beyond believe (see pics) and won't be able to unbolt it. Any ideas how to get the two separated will be appreciated.

So I noticed oil spill a couple of days ago couldn’t find from where then boom I saw it my oil pan was spilling so much oil it got on the serpentine belt and went everywhere causing so much smoke and also my altenater went out . I have never worked on a car hands on but seeing as money is tight...

I have seen/read/googled/watched videos of lots of cases where k20a2 and a3 removal of the rocker assemblies, where they ziptie the assemblies or rubber band them together. The one thing I have a hard time seeing, is how you are supposed to do this on a a2, specifically on the set closest to...

If there is already a thread on this feel free to chime in and paste the link please, but I am curious if there is a way to replace water pump without pulling the engine or anything like that I have big hands so it wont be easy trying to reach in through the top

My rsx's blower fan is stuck on full blast and I've bought a net set of climate controls for it and I have no clue how to change them out. Does anyone know of a video to change it out? Sent from my SM-G955U using Tapatalk

I need new seats I can have them reupholstered for $900 or I can install the leather recaro seats I have but no side airbags. Ive searched all day on many sites and gotten much info but no definitive answer Maybe you can find 1 forum out of millions on this site and others but i didn't. I...

Hello, all I am in the middle of finishing up my wire harness and after removing a lot of wires I realised I had 2 connectors that don't have anything to plug into or so it seems. I took out some wires for the stereo speakers that were on the interior harness. I also removed the ABS and SRS...

I'm gonna be replacing mine today due to it leaking. & heard it's a pain in the ass to reach the bolts by the exhaust mani. Has anyone done this & know the easiest way to remove it? Please be specific if possible, thanks guys!

Trying to take off manifold but its hung up on the bracket that holds P/S and belt tensioner I'd post a pic of it but this site wont let me... Any ideas tho on how to take this bastard off?

Hey guys, I am having an issue that maybe you guys could help me out with. I am replacing the VTC actuator on my 2006 Type-S (grinding noise on start-up) and I am having trouble removing the VTC actuator bolt from the camshaft. I was wondering if this bolt is just a PITA or am I doing...

I've searched and haven't been able to find any instructions on how to remove Rear quarter panel. Anyone ?

Sooo. is does anyone else here think it's a major PIA to remove the radiator on our auto cars? e.g. there is a transmission line that connects to it at the bottom, you have to remove the "bulkhead", and all the plugs are horrible to unplug etc., And also, the thermostat, it seems like a...

whats up everyone. I decided i wasn't feeling my aspec rear lip anymore and decided to take it off. The lip had been on there since i bought the car 4 years ago. My problem now is removing the black stuff that held it up.

Does anyone know if acura/honda make a special tool to remove the inner tie rod there is no room to work with..... no loaner tool won't fit, try that wrench didn't move help me out here guys

How do i remove this silencer from my aftermarket exhaust?? It doesn't have any bolts to remove it?