Search Results for ‘reset’

Figured this has been post many times, but the videos I found on youtube are quite long. So I went ahead and made this video, straight to the point and only 5 minutes long enjoy! https://youtu.be/1UF2d6OxZgk :hb: :hb:

While handling the timing chain tensioner the pin I was using fell out and the sprocket fully extended. How do you reset or compress the tensioner? On YouTube, I have seen people reset tensioners for other cars using a screw driver.

So about a week ago my battery died and I've replaced it with a new battery that is when the SRS light stays on all the time. Never had this problem before and I did try to reset it http://forums.clubrsx.com/showthread.php?t=308198 with that link. When I followed the steps up to step 9, I...

Long story short I took my seats out to clean the interior and forgot to disconnect the battery first like and idiot. Now the SRS light will not go off even after trying the SRS reset procedure. I keep getting codes 15-1, 12-1, 22-1. 15-1 :: Faulty OPDS unit or OPDS unit not initialized 22-1 ...

Vehicle: 2005 Type-S I'm in the middle of finding any issues that may have occurred to my vehicle after a 10mph front end accident (posted here: http://forums.clubrsx.com/showthread.php?t=1161457) and I couldn't figure out what my high idle issue was. Initially when I turned on the car, the...

Problem Solved.

I'm new to this forum and hope I can find the answer to my problem. I have a 2004 rsx that I store all winter. This year the battery went completely dead and when I put a new one in the radio won't work. How can I reset the security code to get it working again? Any suggestions would be...

Hi all I need help on how to link the ecu to laptop or how reset to work normal, everything still work fine except I can datalog or link the ecu to my laptop thank you

my cel just went on and i want to reset the ecu to get rid of it. which one here do i need to remove to reset my cel?

hi club members, I've just installed a clock spring on my acura, and the srs light is still on. Anyone knows how to reset SRS light on the acura rsx base type 2003. I appreciate that.

I wanted to know whether any difficulties will come from disconnecting the battery after installing new O2 sensor to get rid of CEL light on my Acura RSX 2002. Difficulties such as factory alarm problems, ECUs recognition of gear shifts, etc. Or will it be better to have the CEL reset with an...

I Have A Head Unit. Kenwood. Now I Have A Base Auto RSX. Now When Im Coming To A Yellow Or Red Light I Have To Slow Down So You Do That By Pressing The Brake Pedal. Now When I Do This Or If Im At A Complete Stop And I Hold The Brake Pedal Down So The Car Does Not Roll Forward If I Have My Radio...

Curious if anyone has done this before. I have heard that by touching both battery cables together for a few minutes(battery disconnected of course), it will completely drain and reset all components on a vehicle. A few weeks back I accidentally left the passenger side window cracked overnight...

So I had pulled my battery to fix some issues with the car in order to pass smog. I've driven it 7 miles, yes, 7, including the drive to the smog place, after I hooked everything back up. So obviously the ECU wasn't ready - I just sort of brushed this off, but sure enough, the tech told me the...

I'm going to install a AEM intake to my ep3 and in a few months going to get some headers and full exaughst should I reset my ECU after the intake install? If so, how do I do it I heard 2 ways one remove the fuse for about 10 seconds and start the car and let it idle or remove the negative off...

Is there an ac reset/siagnosis code on an 04 rsx? I saw aguy on youtube doing it on an 03.. What are the codes and wha doees it do/mean?

Hi Guys i will be installing a AEM v2 on my new brought rsx type s 2005. I'm wondering do i need to reset the ECU after the install ? or just the ECU adjust over time ? Thanks for the answers :vtec:

Hi guys, Reset the P0341 (Variable Valve Timing Control VTC Phase Gap). I reset thinking maybe it might've been false alarm and would know it really is a problem if trouble code came back. I even reset P0134 (A/F sensor) that came with P0341, and that didn't even come back either. Getting...