Search Results for ‘results’

The dyno was done on a dyno jet at www.versuchracing.com (a local shop by me) it was a hazy day with low humidity and about 60 degrees outside. The pull was done in fourth gear. I stopped the pull at 8600 rpms 200 rpm short of redline (I am a wuss) P.S. I will scan the dyno sheet later and...

Here is my dyno results with the Greddy Kit. Had no problems with the kit with the exception of the Nology Wires and blown coil packs. All fixed and running strong.

Greddy Turbo Kit - All Problems Fixed - AND DYNO RESULTS Long story short... when the Greddy RSX-S turbo kit came out, I installed it on a customers car ASAP. The results sucked, it was running way too rich and it had a wierd studder around 2000RPM that was HORRIBLE. Even after putting on the...

Well, it was my first time at the track tonite. I have a base RSX 5 speed I ran three time versus my friend with a Nissan Sentra Spec V . The first time, I messed up at the start line, so I lost and got a 12.04 ET The Second time around I lost but not by much, My friend got a 10.73 E T and I...

I just got back from the track and my results are: 60' 2.386 1/8 9.531 1000 12.287 1/4 14.616 MPH 96.21 I have an aem cai and hondata 4 andortline springs. This was my best time for the night. What do i need to do to improve my times? BTW this was my first time at the track.

http://solar.innercite.com/comptech/media/rsx_icebox.pdf

In the best traditions of squeezing the finest of Honda's parts bin into a Civic, we are pleased to bring you: This was not an exercise in power, but one to extract maximum torque. Specifications: Accord 2.4...

ok, here goes nothing.......I went to the dyno today and did 3 pulls.....first things first...this is not SAE corrected so go figure i guess u can add or subtract HP as u wish....ok the temp was 65degrees and the humidty wus 55%. I am like below sea level so thats a plus, and NO i am a dumb @ss...

Hey wassup. I ran at Fontana once again, but today wasn't the best day to run at all. The track was too hot. Temps were above 80. Also it was pretty windy, about 25 mph which was against me. Mods are in my sig(No i didn't use the azenis cause i only had a limited amount of runs cause i went in...

Any results from dyno day with the supercharged rsx s? going mental with anticipation for some solid numbers !!! lates

Ok, so one of my bulbs blew. Ok no big deal except it was one of those wannabe xenon bulbs. Had it since september. So now i'm gonna switch all my bulbs back to the stock ones. The difference look like this. Left is stock right wannabe xenon Not that big a color difference cause stock...

Heres my best run tonight @ LACR in Palmdale, Ca which is 3000 ft in elevation. I am not verry happy with my time even though i got .1 second quicker. Oh ya, I put my stocks back on. I used peoples methods, didnt work. Puck Pucks method didnt work for me and it gave me a 15.5 I dont think the...

Yo people. Thanks to many for giving me advice before i went to the track for the 3rd time. I remember a thread back in the day that said "3rd time is a charm" or something like that, well it sure was a charm for me. Heres my slips. I put my best slip along with my best reaction time(I think i...

Our *real* enemy... WRX? Yah right...you should be aiming for all those ITRs at AutoX. :laughing: Look under DS and STX. The ITR can NEVAR lose! ;) Oh yah...and I forgot. Look how many top places the Honda S2000 got in BS. :thumbsup:

Hotshot CAI, spare and jack removed. 200ft elevation. 85+ degrees. .812 rt ??? 60 ft 6.579 330 ft 10.048 1/8 ET 71.41 1/8 mph 15.637 ¼ ET 88.42 ¼ MPH Stupid timeslip machine didnt print out my 60ft.. wtf? I assume it was 2.4-2.5 cause i dumped at around 2200rpms and got some wicked...

well i know i didnt do good at all... even thought being a first timer i should have done better with all the tips i got but i still failed. I ran 3 times and never got into the 9's.. BTW this is a 1/8 mile run 1st run RT = 1.309 60 ft = 2.669 mph = 72.93 ET = 10.387 2nd run RT = 1.166 60ft =...

Just thought I would share this with you guys in the "turbo section". I wanted to give some idea of the kind of gains/dollar you can get out of a 2.0L EJ20 engine. First off the mods are as follows: -VF22 - $900 -air-to-water intercooler -$1000 -STi 550cc injectors (complete drop-in units) -...

here it is...i'm in the CSP class (don't know why they placed me in there :rolleyes: ). http://www.eng.hawaii.edu/~panos/03-02-02.html

Whoo hoo. Holy smokes! I came in 1st for STS Novice and PAX'd 2nd out of 157 cars!!!! :D Of course there was heavy rain for the first 4 run groups but that's not important. ;) Not to mention that most of the good drivers went to Nationals in San Diego but that's not important either. :D...