Search Results for ‘results’

SWAY BAR PIC ON PAGE 4 Hey everyone! So I got the brand new Alpha series header by Skunk2 and I decided it would be a good idea to do a before and after dyno test to see what the header can do since it's brand new to the market. I got the header installed today at VIP Performance in Portland...

Whats up guys, today I did my first DIY since I bought my car last weekend. Very easy job, took like 30 mins and I took my time lol So all I needed was: the redout vinyl (of course) Dish of soapy water (I used regular dish soap) Credit card Blow dryer Windex I decided to go with the redout...

I'm planning on buying a turbo rsx type s. Before I get the car i preformed a compression test on it to make sure everything was in good shape. Results were as follows ( I don't know the cylinder numbers so i'm just going left to right) 1- 190psi 2- 190psi 3- 188psi 4- 176 psi Are these ok...

So I have been getting lots of requests to do this. I have finally decided to do so! I will be showing you how to get show quality paint out of rattle cans! I did this on my side skirts and Aspec decklid a while back and no one could ever tell the difference between the factory paint and my...

I'm going to purchase a k24a2 with 91k from k20a.org and the guy said he had 165 across all the cylinders cold. I was hoping i could get somee advice to whether these numbers are good and if the motor will have life to it since i plan on putting it in my 05 type s with 80k on the chasis. I ve...

http://www.radardetectorforum.org/attachment.php?attachmentid=7218&d=1342847504 http://www.radardetectorforum.org/attachments/car-discussion/7203d1342811474-retrofitting-my-headlights-tomorrow-installing-my-905s-headlights-uploadfromtaptalk1342811470331.jpg Just need help with one thing. I...

so i did smog a few weeks go and assked the guy if he could pass me again with a CAI for next time i needed a smog he said visually yes but i might not be able to pass smog if i install a CAI he said i barely passed cuz the stock intake was taking too much air or somtin heres the numbers...

What up guys, I just got tuned by Magtunning.com out in. Florida. Here is the end result. Mods: Fujita SRI CRSX Header Buddy Club spec 3 exhaust Exedy stage one clutch Exedy lightweight flywheel

I have an 04 type s and im shopping for springs right now. The car is bone stock and the stance is my first concern. Springs are obviously not adjustable so Im looking for something that doesn't lower the back more than the front. I heard nuespeed makes a set that leaves a good aggressive...

Well I searched and searched for a thread on how to polish an RBC Intake manifold and couldn't find one to save my life. So after all of the pain and heartache of trial and error here it is. Materials List 1. Intake manifold of your choice. 2. Hack saw 3. Angle Grinder, I used one from...

Hey all, I'm getting dyno tuned at Innovative Motorsworks in PA this Wednesday by Derek. I want members to guess my whp and torque results. I will post the dyno graph Wednesday or Thursday. I have a 2002 Type S with a comptech icebox w/ K&N filter, ITR header w/ cat converter, Greddy SP2 (2.36...

stock clutch went last week, went and got Exedy stage 2 with XTD 10lbs flywheel. the problem is, it seems to be shaking and making this chattering noise if i take off under 2k rpm in first gear and kinda not grabbing. i have to take off at 2k rpm for this problem to not occur all the time...

just finished painting rims,was looking for a gunmetal look , but got this not bad, any questions you guys have feel free to holler

CSCS Season Finale 2011 – Results Second set of photos (60+ more added) http://purbread.com/blog/2011/09/cscs-season-finale-2011-results/

I've tried searching but can't seem to find what numbers I should be looking for in a compression test on a stock 02 type-s. I got cyl 1: 200 cyl 2: 190 cyl 3: 200 cyl 4: 180 I hit a puddle of water yesterday and the car did the whole bogged out and white smoke thing, started running real...

The test was independently done by Chris Chang @ Secret Service. As stated by the tuner “After hours on the dyno, we weren't happy with the results we were getting. All data pointed towards the camshafts. Luckily, we had a set of the new Blueprint Billet Stage 2 Cams in stock. With the...