Search Results for ‘rev’

I recently got a bee r rev limiter and was wondering if anyone has exact instructions or wiring diagrams for hooking this up. I have tried and I wasn’t able to get it working. Thanks

good day, i am having some issues with my car. i believe this concern has been talked about before. 04 rsx type-s manual transmission here is my problem my idle fluctuate. it goes up and down. it does this while driving but when i come to a full stop the rev is steady. while driving as...

Hey, I just bought a 03 rsx type s and for some reason I'm hitting rev limit at 7200 but i here it should be around 8100. I always let the engine warm up before trying to go anywhere near there I am just wondering why this might be. The car is throwing codes P1457 and P0141 which I figure might...

So I’ve had my RSX Type-S about a year and I’ve noticed that when stopped at a dead standstill the rev limiter bounces at around 5k, I was curious if this was a stock thing or if I had some sort of aftermarket tuning done to my ECU. Sent from my iPhone using Tapatalk Pro

Hey y'all as you guys can see in my sig I've got a frank motor with a k24a2 bottom and aftermarket cams. My current rev limit it 8600 and I've had no problems and ive been on it for a few months shy of a year. My Question is what have you guys seen as safe rev limits for the stock TSX oil pump...

at HA Motorsports. Get 'em while they're hot

I'm looking for a manifold so if you have one and want to sell it pm me thanks

My friend swapped my voted out cause the head bad. He put a 1.7 non vtec in it. Said it was fixed. Now when I rev right to 4000 rpms I have to shift or my car starts takig seizures. Please tell me what to do.:(

I have a k20a2 swapped ep3 with an ep3 trans. It is kpro'd and tuned but it hasn't been dyno tuned yet. It's throwing a code that says a/f mixture too rich. I noticed today that the engine will not rev over 6,000 RPM. Vtec is working. The car is fine until it hits 6000. I have the rev limiter...

Honda is indulging our ears with a new video that reveals how the upcoming Civic Type R will sound. <span id="more-474227"></span> The entire clip showcases the new car with plenty of flashy editing and camera work, but if you’re here to hear, skip straight to the 0:48 second mark. The little...

When slowing down and coming to a stop, i put the car into neutral. RPM hangs around 1.2-1.5k and slowly goes to 900rpm(my idle). Happens more often while the car is hot.. Already cleaned TB, changed IACV and remove catch can setup any suggestion would help..

Delete

I've been looking around for turbos lately, Ive already decided that I want to go with the RevHard Turbo kit but I cant seem to find it online. Even on turbokits.com it only shows the full race kit. Any help plz?

Okay I was driving my car earlier and it was raining quite a bit. I tried to floor it and right before vtec engaged it sounded almost like the fuel was being cut off and bogged down a bit. I tried looking it up, but everyone else's issues are from trying to rev the car while sitting still...

Hey everyone, I'm experimenting with Kpro v4 and a I just uploaded a new calibration and I changed the tune from the k20a2 cold air to k20a2 with toda race header, intake and exhaust, I also added in launch control in attempt to get the two step at 5000 rpm. I changed the fuel and retard...

Hello, I recently bought a 2002 Acura RSX Type S with 128,000 miles. About a day into owning it a check engine light came on. I took it to Pepboys to get it checked and they told me it was a P0420 code and I was told I needed to change the catalytic converter. I took it to a muffler shop, and...

I've been having a weird issue with some start ups .Starting the car that is warm and has been only sitting a few minutes would quicky rev to 2-3k and go back to idle.It happens at random.I have a stock motor with a v2 short ram. Anybody ever have this problem?

I had the IM/Throttle Body/VC off to get powdercoated, but then decided to part out and sell the car. I bought all new IM gasket, throttle body gasket, and VC gasket. I also did the idle air assist delete while everything was ripped apart. The car starts fine and revs normally at 2k (when...