reverse

Hey guys, first post. I'm having issues with my 02' RSX type s. Sometimes when backing up, the gear shift gets stuck in reverse. It takes serious muscle to push it out, however if I shut the car off, it pops out super easily. Sometimes on a cold start, I struggle to put it into 1st. Same thing...

wanted to add in my reverse wire lead to my radio as I forgot to add it at the time of the installation of my rear view camera, so trying to find the easiest and closest lead there is to the radio location. saw people mentioning the wire is dark green with silver marks, some said it was under...

car started fine this morning, hit reverse to pull out from parking spot slowly, fine. WHen i changed to drive i felt a big jolt. drove off fine for about 7miles. started to sputter a bit then it got worse. now it wont go past 10/15mph in drive or reverse. When I hit the gas it just revs up, but...

I own a 02 RSX type s and I don't know what is wrong with the transmission. Sometimes the shifter will pop out of first gear and go into neutral but there's no grind since my foot is still on the clutch. It also has a hard time getting out of reverse either having a longer throw than normal or I...

I have a automatic acura rsx it will not go into reverse, it goes into every gear but reverse. I do not know why I drove it one time since I put the engine in and it did not go into reverse until I put it in drive then I put it back into reverse and it worked. now it will not go in reverse at...

Okay so I recently installed a stage 2 action clutch and ever since i did none of the gears will go in, I have to like push it really hard to go in and when going in reverse it gears grind. When I try to put car in gear it starts to move. But when car is off the shifts are smooth and fine. I...

As tittle reads need reverse lockout solenoid 02-04 rsx type-s

Up for sale is a square set of authentic BBS LM in 18x9 +5 5x114.3 (Reverse Mounted) with Falken Ziex 912 215/40/18. Wheels are in good condition with no bends or cracks. Face is powder-coated silver with polished lip. Lip can use a good polish to bring out the shine. Some of the black bolts...

I tried to search but it would not let me just putting that out there before some throws a fit. The last couple of days I have been having trouble with getting stuck in reverse and the pedal goes soft then I can't get the shifter into first unless I turn the car off then it comes out of reverse...

I just had my clutch replaced. When I got my car back my shifter now gets stuck to the right.:rest In neutral, i have to push really hard to put the shifter above reverse, and it sticks there. I have to use force to bring it back to the center position. I looked by the cable assembly but I...

So earlier today i was at a stop sign and started to go but a car was coming so i slammed on my brakes and almost killed it but i put the car in neutral and when i got on the main road inn noticed that it was tougher to shift to 3rd gear. So i pulled into a parking lot and noticed that its...

Currently have a K20a CTR swap, with ctr 6spd and been running off the JDM PRD ctr EP3 ECU. I've finanly purchased Kpro for this vehicle Kpro on a PND ECU, and I'm wondering if anyone has attempted the following to gain reverse lock out, which is not offered on the PND ECU. The PND ECU does...

wassup guys! for all you guys planning on going reverse stagger or just want these wheels i got a PAIR of BNIB Enkei RPF1 17x7.5 +48 5x114.3 bolt pattern in silver. bought them and then changed my build route so now there still in the box just chillin. trying to get rid of them for 400 firm...

2002 Civic Si, 119K miles, box stock We changed the clutch in this car a couple weeks ago (NOT a fun job!). Transmission was filled with Pennzoil manual tranny fluid. Transmission shifts like butter through all forward gears. Getting into reverse, though, can be a PITA. Should I rip out the...

Just looking for some more info on this setup. It looks fantastic! Better yet it's functional. Just perfect.

Hi Guys, Just gotten my 06 DC5 GSR a few months back. There is still a lot for me to learn.:fistbump: Do pardon me for my bad English. However, i did a few search online but to no avail. There is this weird sound when ever I engaged into reverse gear and release the clutch. Senerio When the...

hi i was wondering if you guys could help me out. I have the exedy oem replacement, flywheel was resurfaced all put in ~10k miles ago I broke the clutch in for bout a 1000 miles too. However if I ease off the clutch in 1st or reverse the car is really weak and vibrates so I have to give a lot of...

Just to make it simple, here's a break down of what happened. 1. New clutch installed. 2. Everything went perfectly. 3. Mechanic test drove the car. All gears engaged perfectly fine. 4. Parks and turns off car for me to test it out. 5. I get in car, turn motor on, depress clutch but can't shift...

This DIY is for those who have a 6 speed transmission swap on a base, or have a base kpro or don't have a 6 speed harness. Normally no lock out isn't an issue, I didn't have one for years but in racing situations shifting fast usually leads to overshooting 5th and missing the gear completely...

I started making a 4th brake light/reverse lights for the small space on the mugen rear lip on my rsx. (I apologize to the owners of these cars/pictures for using the images below without permission) I know you can use a crv brake light but i don't like it, I want it to be similar to the...