Acura RSX, ILX and Honda EP3 Forum banner

revhard

  1. Rev9Power or Revhard turbo kit?

    Turbo RSX
    Are these kits the same or 2 different companies. Are there any turbo kits still being manufactured for the 05 RSX Type-S?
  2. Looking for RevHard Turbo Kit

    Turbo EP3
    I've been looking around for turbos lately, Ive already decided that I want to go with the RevHard Turbo kit but I cant seem to find it online. Even on turbokits.com it only shows the full race kit. Any help plz?
  3. Revhard turbo kit + extras

    Northern California For Sale: Local Pick-Up
    I have forsale a revhard turbo kit, my car isn't a daily driver so I only put about 5k miles on the turbo kit since I installed it 2 years ago, not too sure how much was on the kit before I got it used off another member. The turbo has no shaft play but it does smoke/leak a little from the...
  4. WTB: REVHARD downpipe

    Want To Buy or Trade RSX
    Just as the title states, want to buy downpipe to fit REVHARD/EMUSA log manifold setups, 4bolt preferred, text 5705613015
  5. New York F/S: 2002 EP3 Revhard Turbo

    Vehicles For Sale EP3
    For Sale: 2002 Honda Civic Si Hatchback (revhard turbo) Current Milegae: 67,XXX I am the second owner of the vehicle and I purchased it completely stock. All work on the vehicle was done by me. The vehicle was professional tunned by Jeff Evans ( http://www.evans-tuning.com/ ) It dyno'd at...
  6. FS Revhard Intercooler and Pipping

    Forced Induction & Nitrous RSX
    I have a revhard intercooler for sale. It comes with all the pipping, hardware, couplings, and clamps necessary. It was installed on my Rsx, I believe it also fits ep3 civics. BOV NOT INCLUDED, if you would like the Tial 50mm bov we can arrange a price. Just shoot me a message. I believe...
  7. Revhard downpipe + high flow cat

    Forced Induction & Nitrous RSX
    High flow cat 2" $50 + shipping (o2 sensors and cel eliminator not included) Downpipe SOLD This is the 1st o2 bung. There is a small hole in the weld, I was thinking jb weld to fix it.
  8. Jamesl85's Revhard Manifold Turbo Build (Page 14 needs more boost, I need more fuel)

    Member Show-Off RSX
    2006 Metallic Magnesium Acura Rsx Type-S Motor: -Stock longblock k20z1 Engine Management: -Kpro Turbo set up: -Precision 5831 turbo -Revhard mani -Revhard intercooler and charge piping -Precision 39mm wastegate -Greddy Type RS BOV -MAC boost solenoid -Hondata 4 Bar MAP sensor -BWR oil plate...
  9. RevHard Turbo kit! NEW! NEED TO SELL ASAP $1000 firm

    Forced Induction & Nitrous RSX
    sold SOLD sold SOLD sold SOLD:thumbsup:
  10. WTB 2.5-3" downpipe for Revhard mani

    Want To Buy or Trade RSX
    I'm looking for any 5 bolt downpipe for a revhard / log manifold t3 setup. Let me know what you have I'd prefer 3" but 2.5" will do.
  11. Turbo parts!

    Forced Induction & Nitrous RSX
    A few turbo parts I need to sell! Name: Shaun Location: VA Contact: Pm questions Price: posted/p.m. offers (Private Message) *NO trolling or bashing plz* 38 mm Tial wastegate w/ 7lb spring $180.00 Revhard log manifold $150.00 Dump Tube $50.00 RevHard 2.5" Down Pipe wrapped (o2 not...
  12. FS: RevHard Turbo Kit |Precision SC34 | Vortech BOV | KPRO

    Florida For Sale: Local Pick-Up
    I have for sale my complete RevHard Turbo kit. It comes with everything needed to bolt on, Turn the key and drive away. I've had the setup on the car for about 4,500-5000K miles. It pulls GREAT, No shaft play, up, down or side to side. No leaks anywhere, Couplers hold great and comes with T-Bolt...
  13. Anyone w/ Revhard Manifold Use This Downpipe?

    Turbo RSX
    http://www.speedyracer.com/exhaust-p...Turbo-Downpipe im looking for a new downpipe to bolt onto my Greddy EVO TT exhaust and im thinking this one will be the one, anyone have any experience? any fitment issues or whatnot? Quality issues? Or if anyone knows of a company that makes a higher...
  14. WTB: Downpipe for Revhard manifold

    Forced Induction & Nitrous RSX
    closed
  15. FS: SOLD bnib Revhard Rep Intercooler, Tapped Oil Pan

    Forced Induction & Nitrous RSX
    I have a replica revhard IC that will also fit inreplacement of a greddy ic. I bought it and its been sitting. I do not have any piping for it. Specs: 28 x 11 x 2.5, 2.25 inlet/outlet Price: SOLD STEEL Tapped Oil Pan Ill try to get better pics of the welds when I get a chance Price: SOLD
  16. Revhard Turbo Manifold

    Forced Induction & Nitrous RSX
    Hey all, I have this manifold that I bought with intentions of using it in my build. I ended up never using it and putting it up in my attic. It is in good condition with no cracks. I am wanting $100 plus shipping for it. I will put up pictures and my name with it first thing in the morning.
  17. FS: Revhard manifold SOLD

    Forced Induction & Nitrous RSX
    SOLD Selling my rev hard manifold. bought it to replace my greddy but decided to buy another car instead. Never used it, got it used. No cracks, in good condition. 100+shipping.
  18. JDM Brake ducts,replica window visors, Greddy or revhard manifold

    Want To Buy or Trade RSX
    Hey guys looking for these parts, Thanks!
  19. revhard turbo kit f/s and KPRO 1700 + shipping

    Forced Induction & Nitrous EP3
    everythings included except kpro. :troll: Rev Hard Turbo kit w/ T3/T04E upgrade blow off valve upgraded to greddy vacuum line to boost gauge included txt 8037473333 for quicker response more pics on request
  20. revhard turbo kit f/s + kpro 1700 + shipping

    Forced Induction & Nitrous RSX
    everythings included except kpro. :troll: Rev Hard Turbo kit w/ T3/T04E upgrade blow off valve upgraded to greddy vacuum line to boost gauge included txt 8037473333 for quicker response more pics on request --last minute christmas special 1400 for turbo kit and KPRO!! new info call or...
Top