Acura RSX, ILX and Honda EP3 Forum banner
rod
1-20 of 500 Results
Advanced
  1. Suspension, Chassis & Brakes
    I'm running coilovers and my OEM outer tie rod ends keep breaking after a while. Any advice?
  2. The DIY Garage RSX
    I replaced all 4 struts and the tie rod ends. I utilized KYB shocks and Moogs tie rod ends. Failed inspection because of that crap and the car needed a lil' bit of love anyway. You guys have see the steps to get the RSX safe and inspection ready. This is a simple and easy task that I personally...
  3. Texas For Sale: Local Pick-Up
    I’m selling a set of 0857 Inverted Tie Rod Ends. Despite their appearance, they’ve never been installed. I had them in storage for over a year. Asking $100. You can text me at 915 346-2068 for a quick response. Located in Austin. Thanks.
  4. Suspension & Brakes RSX
    Sold
  5. Suspension, Chassis & Brakes
    I'm currently installing a set of BC Racing coilovers on my 03 type s. I've got the rears done so far... I forgot to get a tie rod tool prior to starting this project so the fronts are on hold at the moment. I was looking at the front end yesterday and my tie rod ends look like garbage and need...
  6. The DIY Garage RSX
    Decided to install some ktuned inner tie rods to correct toe issues I was having with being lowered. The ktuned are adjustable inner tie rods meaning you can adjust the length to either bring your toe in or push it out getting your tires straight. It is a common problem for people who lower...
  7. Problems & Solutions RSX
    About to attempt this just need to get the right tool and just want to make sure I'm doing it right so I don't waste my time so just looking for some insight. (seems like there's a lot of mixed info when you try searching this up with people explaining how to the outer tie rods ends.) saw...
  8. Suspension & Brakes RSX
    Purchased thinking I was going to need for alignment, ended up not needing. BNIB, hasn't been opened. $135 shipped. Text for instant response. 678-326-9327 Thanks
  9. The DIY Garage RSX
    Tried to replace actuator, accidentally broke the plastic clip that holds gold rod to the door lock actuator (not the handle side). Anyone know the P/N? I check acurapartwarehouse and oemacuraparts diagrams but didnt see it. My closest acura dealer is 45 minutes away. Trying to see if I can...
  10. Canada East: For Sale & Want to Buy
    Does anyone have front camber kit, rear camber kit or inverted tie rods to get rid of? If so, send me a message. I am located in Toronto Thanks
  11. Turbo RSX
    Hello, I have been searching like crazy online and on clubrsx, but with little or no success. My goal is to run approximately 20 pounds of boost. I am already running at 12 pounds, but i want to upgrade my pistons first. After carefully reading, I have decided not to change the bore size, so...
  12. Problems & Solutions RSX
    The old suspension has a tapered hole where the tie rod would drop in at. The new coilovers don’t. It sits higher than the old setup. Here’s a pic. Any comments? Is this normal ? Am I missing something ? everything ive seen says these should be plug and play. the tie rod ends definitely dont...
  13. Suspension, Chassis & Brakes
    I just installed Raceland Ultimo coils on my RSX and when I put the tie rod ends back and bolted it I realized they were too short and my alignment was way off, the front wheels were crosseyed facing out. Reading online I realized that you do need longer tie rod ends if you are lowering your...
  14. Want To Buy or Trade RSX
    Looking for new or used 0857s. Pm or TEXT 210-710-6891 Thx
  15. Southern Cali
    Date: 12/2/2017 Location: Hot Rod Dogz - 44835 Beech Ave, Lancaster, CA 93534 Time: 5:00pm - 8:00pm - Show Up Anytime! We do ask that you abide these GUIDELINES Hot Rod Dogz has a huge menu selection which includes beef hot dogs, philly cheesesteaks, pastami sandwiches, fried chicken...
  16. Problems & Solutions RSX
    I am changing the coilovers on my 02 type s, and I am having trouble getting the tie rod end to completely press down into the seat on the front coilover anyone have any suggestions or experience with this?
  17. Southern Cali
    Date: 8/18/2017 Location: Hot Rod Dogz - 44835 Beech Ave, Lancaster, CA 93534 Time: 7:00pm - until whenever - Show Up Anytime! We do ask that you abide these GUIDELINES Antelope Valley Auto Enthusiasts Meet Page - Check Here For Updates Antelope Valley Auto Enthusiasts Instagram - Meet And...
  18. Southern Cali
    Date: 7/21/2017 Location: Hot Rod Dogz - 44835 Beech Ave, Lancaster, CA 93534 Time: 7:00pm - until whenever - Show Up Anytime! We do ask that you abide these GUIDELINES Antelope Valley Auto Enthusiasts Meet Page - Check Here For Updates Antelope Valley Auto Enthusiasts Instagram - Meet And...
  19. Suspension & Brakes RSX
    The 0857 Inverted Tie Rod Ends have been sold to Mr. Martinez. I also have a pair of Truhart rear camber arms for sale. They've been modified some for a little extra adjustment. 90$ shipped! :fistbump:
  20. Southern Cali
    Date: 5/19/2017 Location: Hot Rod Dogz - 44835 Beech Ave, Lancaster, CA 93534 Time: 7:00pm - until whenever - Show Up Anytime! We do ask that you abide these GUIDELINES Antelope Valley Auto Enthusiasts Meet Page - Check Here For Updates Antelope Valley Auto Enthusiasts Instagram - Meet And...
1-20 of 500 Results
Top