Search Results for ‘rods’

Sold thanks guys

Up for sale- Hasnt been used since built- Built K24a2 VIN# JH4CL96936C018366 with Ceramic Coated CP 11.5:1 87.5mm Pistons Blueprint Ultralite I-Beam Rods Micropolished/Balanced Crank ACL Race Bearings Balanced Rotating Assembly Work done by a local reputable shop- Automotive Machine & Supply...

Hey guys. Looking for some inverted tie rods! If anyone is selling some hmu!! Really need them to get my toe to 0. I have -3.5 camber up front so I was told I needed inverted tie rods to get me to 0 toe.

Sorry guys, I just broke/cracked it pulling in the driveway. Thanks for the interest though.

Brand New Supertech P4-HK87-P4 Racing Pistons (Set of 4) For Honda / Acura K24 Blocks with K20 Cylinder Head Includes pistons, rings, wrist pins and locks Specifications 12.5:1 Compression Ratio 87mm Bore 3.897" Stroke 5.984" Rod 1.181" (30mm) C/D 50.7 Head CCs 4.5 Dome CCs 312 Gram Weight...

I've done several hours of searching and have yet to find an answer. I'm wondering what the difference in design/material the k24z3 rods have in comparison to k24a2 rods. Are these rods stronger than the old a1/a4 rods? Any answers would be greatly appreciated.

I am looking for todds tie rods used or new locally before ordering online. Also i am looking for hyperco or swift springs with stiffer specs for ep3 coilovers.

For sale is a pair of brand new todds adjustable inner tie rods for anyone running into toe issues. Brand new unused. I ended up not needing them here is a pic Asking 250$ shipped or $230 picked up. Since it's 259 + about 20$ for shipping from Todd. Text @ 7148236809

For sale is a pair of brand new todds adjustable inner tie rods for anyone running into toe issues. Brand new unused. I ended up not needing them here is a pic Asking 250$ shipped. Since it's 259 + about 20$ for shipping from Todd. Text @ 7148236809

I have barely used 9:0:1 JE pistons and Pauter Rods for sale. They are for a K20. I used the setup in my car for roughly 1 hour before I spun a bearing in one of the rods. I spoke to a machinist, and they estimated the repair cost to be between $75-$100. The bearing seat will need to be...

-For sale i have (4) k24a1 rods and pistons, boxed and ready to ship IMMEDIATELY. comes with rings and bearings, used obv. but in good condition. - k24 oil pressure sensor - k24 knock sensor - k24 steel oil pan. - k24 water pump and water pump housing - k24 thermostat - k24 timing chain - k24...

$150.00 plus shipping takes everything K24a2 rods Bought new 8500 miles ago, still in excellent condition. I have three 09 tsx pistons with same mileage all in great shape, can get the 4th from Honda for under 80 dollars. Asking $150 for everything. Definitely or best offer lol

apr performance 8mm front splitter rods - $50 USD shipped + PP fees

Hey guys I've been to look up how to change these damn inner tie rods but havent had any luck. I managed to do the driver side inner tie rod with a vice grip but now the passenger side is giving me problems. I have no clearence to take off the nut holding it. Anybody have an ideas? Or know...

Nothing is available, Decided to go ahead with the build.

Currently I have a 03 ported k20a2 head and a stock 08 k24a2 block. I wanted to change my stock pistons to high compression and my stage 2 cams to stage 3 cams. Then I thought I might as well bore out my block. 1.Would this be beneficial to my set-up? 2.if so what size do i bore out to...

I have a k20a2 with 88mm je pistons. Any advice/recommendations for rods?

Selling a new set of Carrillo Pro SA rods..$700 Shipped. http://www.ebay.com/itm/251599675793?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you have these coilovers, please post if you had to either get longer tie rod ends, cut inner tie rod, or just kept the OEM ones on. I'm looking to pick these up but hearing mixed reviews of peoples toe problems after install.

Looking for an Injen washer fluid reservoir bottle, just needs to be in working condition (no leaks).