Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 279 Results
  1. Wheels & Tires
    Has anyone run stock 05-06 Type S wheels with stock-sized 215/45-17 tires with 20 mm spacers? From what I'm reading, it seems like the 25mm spacers will rub in the rear without fender rolling or lots of camber, but I'm wondering about the 20mm spacers with camber corrected? EDIT: Also, does...
  2. Suspension, Chassis & Brakes
    Actually I have buddy club rca with suspension but I want to put back my oem springs is possible to keep the rca or I need to swap back to oem rca?
  3. Bolt-On Basics: RSX (Base)
    Alright guys, during my time on this site I've ready plenty of things about the base(many of which were not good), but realistically, I'd like to see and hear about your guy's experiences with modding the A3. Was there any real worthwhile results you came out of it with? I would like to see if...
  4. Northern California For Sale: Local Pick-Up
    Autopower 4 Point Roll Bar. Comes with all hardware needed for install. Asking 500 OBO. Picked up in San Leandro Also have a Mugen Rep. mid bar. $20 firm 2017-09-23 17.44.17 by initiald3s, on Flickr
  5. Problems & Solutions RSX
    Hey, everyone - I'm going to replace the window regulator in my driver door and need to get the window down so i can unbolt it from the track... anyone know how to manually roll down the power window? I did search but only found a link to "how to replace regulator" which already had the...
  6. Interior Mods RSX
    So i wanted to get racing seats and takata harness but im confused on whether in should get just a harness bar or a full roll cage. I've heard that having a harness bar is more dangerous than stock whats the differences between having a harness bar or a cage. Or is it safer just to have neither...
  7. Southern California For Sale: Local Pick-Up
    sold pls close
  8. Wheels & Tires
    Hey guys, I just pick up a set of Enkei RPF1 17x8 .45et in front and 17x9 .45et on rear, Currently I'm running Stock 17x7 .45et wheels with .25mm spacers on Tein S Tech springs which give approx. 1.7" drop in front and 1.6" in rear. It's pretty flush to the fender from front to back, a little...
  9. West
    A place to meet fellow members. I'm in Tucson!
  10. Northern California For Sale: Local Pick-Up
    Anybody have an Autopower roll bar for sale? Thanks.
  11. Problems & Solutions RSX
    ok so i had my CMC go out, so like everyone said i replaced it with an em2 cmc, ok, so, i install it try to bleed it, try to gravity bleed it, try a one man bleeder kit, nothing worked, wouldnt build pressure, so i unbolted it from the fire wall and tried to pump it by hand and bingo, have...
  12. Suspension, Chassis & Brakes
    Car: 05 Honda Integra DC5 Luxury 5Spd/05 RSX Base Hey guys, just bought this 6pt(?) rollcage for a steal (Almost new, came out of a DC5R). However I can't find any details on the cage itself nor any installation instructions on the web. On top of that, it did not come with any nuts and bolts...
  13. ECU Tuning RSX
    Who here is running KTuner? I am, we need a place for cals, insights, experience so on and so forth. There's no other place that has a legit thread on sharing cals etc, I'm aware the community isn't is big as Kpro yet but we need to band together as it gets more popular!!
  14. Welding, Fabrication, & Tools
    What would be the most cost effective way to weld or bolt in a 8 point cage? Buy the steel? Order a pre-fab? Looking to throw a cage in over the winter, because I plan on running low 10's next year, and I don't want to get kicked out of the strip... Thanks in advance, -Miguel
  15. Suspension & Brakes EP3
    I was wondering if anyone has installed rear Wilwood brakes on the EP3. For some reason pulling on the e-brake hard barely stops the car from rolling. The car has to be put in gear on a hill (all though that should be done anyway). Getting the car from my friend and he has rear Wilwoods...
  16. Welding, Fabrication, & Tools
    I'm really looking to roll my fenders professionally! would like to know of any good shop that can do it for a good reasonable price
  17. Southern California For Sale: Local Pick-Up
    Both items have some scratches. Asking 400 for the roll cage Nrg harness bar sold Pm me if interested
  18. Wheels & Tires
    planning to go for wedsport tc105 wheel, 17×9 0ffset 25 and tires of 235/45/17 for both front and rear. I'm still not sure that they gonna work out with my ride fitment or not. Any suggestion? And i'm lowering my car with Mugen shock up set.
1-18 of 279 Results