was driving home and as i pushed in the clutch to pull in the driveway it died. so now it idles at around 6 or 700 cold and then 500 after it warms up. if i rev it it will go all the way down to 3 or 4 then back to 500. p0505 code air idle control valve. but i changed the air idle control valve...

Ok guys here is my problem. I have a 2003 rsx, was driving to work and engine just locked up wouldn't turn over for nothing. Got it towed home and later that day i got it to start but it idles crazy rough. When it finally starts you have to give it full throttle for a couple seconds for it to...

First off the car has K-pro, Skunk2 alpha headers, and a k&n typhoon SRI. If that matters. I bought it like this. I tried cleaning the throttle body and the 02 sensor looked decent. It only has 1 primary hooked up, no cat, and the evap system doesn't seem to be hooked up either. It smells like...

my 05 acura rsx is running really rough after changing motor mounts. jack engine and trans up just an inch or two to take pressure off of mounts and now it runs like there is a vacuum leak. are there any lines or something I might have pinched or pulled off while doing this. base model with auto...

Hey guys, Searched before posting, so I'm pretty sure I know what the answer is, but just wanted some opinions: The driveway into the parking lot at my office is pretty rough (steep, cracks at the bottom) and it's right off a main street, so sometimes to avoid getting rear ended you have to...

So I noticed my exhaust sounding weird and now i think I hear a tick in the engine? Valve adjustment? Tct? Any help is appreciated. https://youtu.be/eGsMCM8S05U

As the title says been having trouble with my car. Here's a vid of what she is doing https://youtu.be/bnEHS0uNQDI thx

I've been having a problem with my Rsx, it starts up and idles @1500 rpm rough idles for 10 seconds then dies. I've tried new spark plugs, new fuel pump, new fuel injectors, new fuel pump relay and lastly i tried this new o2 primary sensor. Still same problem, and when i check with OBDll reader...

so i have read a lot of the posts that are similar to mine issue so on friday night there was a real bad rain storm and if you know tucson you know that streets here flood like crazy some streets look like rivers so it was raining and i was working so i had to drive in it car felt a little...

Hi All, I purchased a 2002 base RSX about two months ago now and so far have been pretty happy. However I have always disliked the ride...... At low speeds it is frankly awful and is upset by every little bump, it smooths out past 100kph..but still. The car has approximately 190,000km on it and...

Selling an authentic air walker japan full body kit. Front bumper, side skirts, and rear bumper. Fitment is perfect but it needs a lot of work. Front bumper and possibly a part of the rear bumper will need some fiberglass. They all need new paint. Brand new retail i think was around 1800 back in...

what would cause the suspension to hit hard on speed bumps? Im just taking a wild guess that I bent the strut somehow when I was installing control arm.

Okay I am going to list out everything that I have changed in between when it ran well and now. Here is the complete setup: 03 RSX Type S 08 Acura TSX K24A2 Here is what I installed: Deleted AC Deleted IAC Valve Deleted EVAP System Polished RBC Intake Manifold Skunk2 Fuel Rail RC 750CC...

A few weeks ago i started to get a nasty grinding/rubbing sound coming from one of the front wheel wells when making a sharp right turn from a stop, and accelerating. Wheel bearings were replaced not too long ago, and i think I could cancel them out simply because it ONLY happens during right...

Hey guys I'm having a bit of a problem with my car idling rough after startup. I just installed my turbo kit including a basemap that I got from xenocron, now @ 1st the car started right up and it was idling @ 1100rpm for like 30 second. Right after that the rpms started to go down and the...

Car runs fine for the first 5 minutes after it starts revving to 2500 rpm when in idle. Pls help:confused:

So a couple weeks ago I changed out my clutch. The front of the car was on jack stands and the read was on ramps. I had a few issues getting my flywheel resurfaced so my car was on stands for about a week. I got everything back together and everything is fine except now it rides really rough...

I've been having this problem for a couple of months now. My car has a rough idle and from time to time the rpms will drop to almost zero. When I'm driving and I press the clutch when slowing down the car will stall sometimes. When it first started doing this I got a cel code p0134. I replaced...

Hello, my Rsx has been running kinda rough lately, anyone no any simple solutions that may help?