Search Results for ‘sanding’

So, i decided to remove the tail light tint on my car by sanding and polishing. I had to use a 200 grit to remove the tint, as it had so many layers of paint. I didnt use any other grit sand paper and then applied meguiars plastx, but it still seems hazy and scuffed. What can i do to make them...

So I'm getting side skirts today in the mail. They are used and have some scratches and they need to be sanded down for repainting. What's the best way to do so? Just some sanding paper? Any advice appreciated!

well I had got the 05-06 p1 lip converted to fit my 02 dc5 but the problem i have now is the parts that my body guy had cut is ruff and hitting my front bumper and causes scratches so my question is, is there any sanding material I can use to make the edges more smoother because it is ruff, I...

Hazed and oxidized headlight Hazed and oxidized headlight you can buy this stuff at home depot/menards/lowes almost any home improvement store in the kitchen and counter dept. one quick spray application,let sit and bubble out oxidation,it should dry after a few min then wipe/buff with a...

RESOLVED W/ PICS: Bushing needed 30mins filing to fit but now very smooth :giggity: I just installed this product which I bought from CRSX along with some other goodies and while the larger bushing went on fine, the smaller bushing was a pain to install and while I know the cable doesn't sit...

I have read a lot of threads on this but they are all about 4 years old and I need some new information. I have a carbon fiber hood and carbon fiber trunk that need some love. The hood only has a little bit of clouding so its not to bad. The trunk on the other hand the previouse owners did not...

im just wondering wat happens if i sand paint off a cf hood. i want to sand off my paint and re clear coat it. will it look back new?

When i bought my rsx back in may i noticed that the headlights were hazy which i understand is pretty common among our cars. So after i did the diy blackouts i went ahead n wet sanded them n polished them with plastx. But their still hazy. They look fine when the headlight is off but when the...

I have some some really nasty 1500 grit sanding marks on my bumper. I have a shipment of touchup paints from Paintscratch.com coming and was wondering if some clearcoat would fix the problem instead of using a buffer because I do not own one and do not want to get one just yet (trying to save...

Did this for member Fast Afghan. I will also be posting the car I did for his father after I make this one. Long story short, his friends put a raft or something on his hood and tied it down with the handles of the tube or what not down on the paint and it scratched the crap out of it. He...

Someone PM'd me about polishing or sanding but I forgot who it was, I forgot to reply to your PM. Let me know.

anyone here know of a place that does nice colorsanding and polishing and what not, and their prices?

i have a fiberglass type r lip kit. Im going to paint it myself but i was worried about sanding the fiberglass. Can anyone fill me in?

i did the LED CONVERSION thing for my gauges.. where it redlines...the red part...doesn't come out very nicely with my BLUE SMD LEDS. my friend sent me a site from THE V BOARD (sentras SERs)...

cut the fender so i can install my sidemarkers? Id drill a holes then start from that

I was thinking of wet sanding my diy rims. I recently painted my rims and on my last rim the spray paint bottle started squiring out blots of paint. I forgot to clean the tip of the bottle before I started again. Anyway, I tried to fix it by doing a couple more layers of paint over it but it...

Does anyone know about color sanding a car? I was at the auto body shop a few days ago and they told me that i have a lot of water spots and the only way to get it off my car is to color sand it. Color sanding will also take out a lot of my minor scratches. The thing is, they are charging around...

Hey guys, I have a 5 inch long scratch on my driver's side door :) The scratch looks very white, but I can't feel it. I took it to Acura and they said they would water sand it out for me and said it MIGHT work. Can they screw up the finish by water sanding, or is it pretty safe?

My buddy and I are going to try to black-out my headlights on Sunday. I have the right spray paint stuff. Plasti-kote Ultra Enamel; Satin Black (1103) I read the ClubRSX DIY Guide for Black-Out Headlights . I just don't see anything on there about sanding. Should I still do it? If so how...