Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 77 Results
  1. Car Audio, Security, & Electronics RSX
    Hey guys I’m replacing my driver side lock actuator however I took everything a part it went smooth but I can’t for the life of me get those 3 screws loose. So I put everything back together. What is the best way to remove them without stripping them ?
  2. Problems & Solutions RSX
    Found some screws in my 2003 rsx type s and I wonder what they are for! Thanks
  3. Problems & Solutions RSX
    Due to water leak from the tail light into the trunk I bought new tail light gaskets to replace the old ones on my 2003 RSX-S. The problem is that I cannot remove the 4 totally rusted Philips screws to come off from the bottom of the tail lights. For two days I spayed Liquid Wrench penetrating...
  4. Problems & Solutions RSX
    My mechanic was trying to take them out to replace my rotor but dann screws won't budge .. nothing seems to have worked .only option is to drill them out .. Looked around the stores here like autozone and orielly but none seem to carry those screws ..after searching here ..I found that many...
  5. Problems & Solutions RSX
    So Of course I'm checking my power steering reservoir and i drop my flash light in the engine bay. I have a magnet on a pole type thing but of course the flash light is not metal enough. So i go under the car and i see there is one screw holding the two plastic under belly pieces together...
  6. Want To Buy or Trade RSX
    Looking for all the fender liner screws in order to secure my fender liner. Thanks!
  7. Exterior Mods EP3
    I am assuming there is a specific kinda of screw that screws into the front fender wells for the ctr skirts correct?? Does anyone know the specific part number for this??? Or if you didnt use this but there was another kind of screw that fit correctly. would you be able to let me know?? cheers...
  8. Problems & Solutions EP3
    well last year, i had a shop replace my front motor mount. i found out they stripped 2 of the 3 screw bolts and only installed 2 bolts anyhow I guess they stripped holes because the bolt won't stay in and the other won't tightening (screw it just keeps spinning). there was shaved aluminum on...
  9. Suspension, Chassis & Brakes
    Anybody know the exact dimensions for the bleeder screws for the DC5R Brembos? I think the thread pitch is M10x1 but don't know the length. Thanks.
  10. Buyer & Seller Disputes
    ordered front and rear sway bar bushings; kseries parts sized them and told me what to order; they got it completely wrong, parts don't fit; they won't respond to my request to fix it. is there someone specific there I should talk to, or should I just add them to the dooshbag list?
  11. Problems & Solutions RSX
    Would anyone know if there is a part number for the rear license plate screws? I had lost one of them and wanted the exact same one. I looked on oemacuraparts but cant find it for the life of me! If anyone knows what it is let please help!
  12. Problems & Solutions RSX
    '05 Type-S. I'm trying to remove the screws behind my driver side door handle, but the screws are completely stripped. I don't want to damage the plastic surrounding it. I've tried rubber band, hammer, & pliers. Any other suggestions? Please &Ty! <3
  13. Want To Buy or Trade RSX
    Looking for the screws that hold the mounting brackets onto the sides of the fog light housing.
  14. Problems & Solutions RSX
    Did a lil searching but didn't find an answer. Anyone know where I can get new brake set screws for all four rotors or what size they are? I found these on jc whitney but there's three different...
  15. Exterior Mods RSX
    i got a plate relocator but i lost my front screws where the plate bracket use to be...what size are those screws?
  16. Problems & Solutions RSX
    alright here's the deal im in the middle of changing my front pads and rotors. (1st timer) i'm stuck trying to remove the rotors. i managed to get them out on the passanger side but on the driver side the rotor screws are rusted and partially stripped. impact screw driver doesnt seem to be...
  17. Problems & Solutions RSX
    Mine came off the other day and I am replacing it. How many screws/fender clips do i need?
  18. Exterior Mods RSX
    Where can I get the screws for the bumper the one right above the wheels. What are the sizes of the screws?
  19. Want To Buy or Trade RSX
    BOUGHT IT (Screws) no longer need them Hey guys, Im looking for some missing screws for my 04 type s Front engine mount bolt set (2 of them? i believe) All 4 subframe bolt 36mm front Axle nut (2 of them) also, Im looking for weatherstrip(or molding?), passenger side (see the picture, that...
1-20 of 77 Results