Acura RSX, ILX and Honda EP3 Forum banner

selecting

  1. Bolt-On Basics: RSX Type-S
    When it comes to catback exhaust systems it seems that there are too many out there to make a quick selection. I don't have a lot of knowledge regarding good catbacks, so this is where I hope to get Clubrsx expert advice. I have been recently looking for a new catback exhaust system for my 05...
  2. Wheels & Tires
    Delete
  3. Transmission & Drive Train RSX
    What do you guys think of this clutch set-up? Exedy Organic Clutch Paired With a ACT StreetLite Flywheel? http://www.clubrsx.com/cr/EXE-08806.html http://www.clubrsx.com/cr/ACT-600295.html My 03' Type S is a daily driver. I just have CAI and engine mounts as far as aftermarket goes, and I...
  4. Turbo RSX
    Hi guys I'm building my 01 CG accord once again this time K series. I'm done getting the motor together and I'm about to pick up a turbo. I'm having an issue picking out of these 4 turbos and would like input. Turbo's I'm looking at. 1. Garrett t367 HO 2. Garrett T3/GT40 3. Garrett T60-1 4...
  5. Wheels & Tires
    Hey guys, im planning to purchase a set of rims which i'll list, I'm looking for a good offset and size of the rim. I'm hoping that you guys could also provide pictures of the rims on the car of what you guys might have that I like. Currently everything is pretty much stock on my car, no...
  6. Wheels & Tires
    I have a black 2004 RSX Base and need to replace all 4 tires. The car: is lowered. has 17" rims. currently has - Nexen (N3000 Radial) 215/45ZR17 91W - tires I want suggestions on which tires would be the best for my car according to: Ride comfort Noisiness (current tires are noisy at...
  7. Car Care RSX
    Alright, so im getting everything i need together to start from scratch on my newish rsx. Ive done a lot of research and searching about polishes and heres my dilemna: My car has quite a bit of swirling and one or two scratches in the paint, the overall gloss is great and theres very little if...
  8. All Motor RSX
    For mu application, I plan on using 12:1 CP pistons, but im trying to choose rods. I most likely will not be making over 270 bhp, so does it REALLY matter what type of H-beam rods i go with? I know eagle isnt the best, but am I risking my engine by going with them considering im not making...
  9. Turbo RSX
    I found this on RC's website. It's a great way to find out what Injectors are right for your application.:thumbsup: http://www.rceng.com/technical.htm
  10. Turbo RSX
    Hey all whats the formula for selecting a turbo for a specific application. What i mean is proper trim size and proper air flow efficiency, etc. Im biting the bullet and going boosted. I decided to go turbo since my custom vortech supercharger project was gonna cost an arm and a leg. :( ...
  11. Turbo RSX
    I was having some trouble understanding a few things about trim angles and compressor efficiency. I did some research and found a nice artical that might help some others in choosing which is best for them. Trim & Efficiency Artical Hope this helps some of you.
  12. Exterior Mods RSX
    got hit from behind last saturday and I'm thinking of getting a new rear bumper or just rear spoiler what would u guys suggest i was thinking gettin the ro-ja rear spoiler http://store.clubrsx.com/graphics/00000001/ro_ja_full_body_kit_rear.jpg ohh one more thing where's the cheapest place to...
Top