Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 89 Results
  1. Problems & Solutions RSX
    I was driving around thinking, "it's kind of cold for 80 deg", and "why does my car seem a little sluggish?" Well, the AC was on, because the vent was set to defrost, which is completely normal for Hondas. The green AC light was not on though, so I didn't realize for a few days what was going...
  2. Car Audio, Security, & Electronics RSX
    Part #30-4110 Watsup clubrsx I just purchased the gauge and sensor combo to setup with kpro for data logging, tuner requested it said stock o2 wasn't good...Looking to clear up how to wire the gauge to kpro? I came across some good info on xenoncron that I'll post a pic of.. Saying the power...
  3. Turbo RSX
    Hi, Ive recently switched to e85 and changed my fuel pump also. Im running a gt35r and wanted to ask what you guys have your fpr set at? Also i have made the switch to 2000cc injectors. Currently the car is getting 60psi when I turn the key to on. I feel this is a bit high so want some input.
  4. Bolt-On Basics: RSX (Base)
    I know the go to budget build for our engines is to swap in the a2 cams and rockers with the rocker pins switched. Plenty of you have done it, most of you with KPro. I need some info on how to setup this swap in KTuner and what values to set for VTEC and how the Base MT Base Map responds to...
  5. Suspension, Chassis & Brakes
    Hello everybody. I just bought Koni Yellows (yey!), the thing is that previous owned put on Tanabe GF210 springs on the car. So I am wondering if I can set Konis on softest setting and don't mess it up with these springs I got. Thanks in advance!
  6. Problems & Solutions EP3
    This is my first ep3 and I picked it up last Wednesday. I've had a few issues thus far and one is yesterday while waiting for my gf to get done tanning (15 mins) I noticed it starting to idle rough. I looked at all the gauges and seen that the temp was 3/4 way to hot so I shut it off. She came...
  7. Auto X & Road Racing
    I'm thinking about starting at cold 36psi front to start with. Watcha think? I have a laser thermometer and water sprayer for the tires. EP is a dd and would like to leave front camber at approximately -2.5 to -2.7. Caster is more adjustable with caster plates. Suggestions? EP is pretty light...
  8. Problems & Solutions RSX
    I can barely feel the air blowing on the floor. Even on high setting, I can hear it blowing but not blowing towards footwell on both driver and passenger side. Does anyone have the same problem? My carpet doesn't block any air flow.
  9. Car Audio, Security, & Electronics RSX
    Hey guys, i just bought some subs and a amp, and i got everything done except i cant figure out where i would plug in the "audio in and out". To plug my subwoofers directly to my STOCK headunit? Is it impossible to do? or can i do it somehow? would i need to buy a new headunit?
  10. 1/4 Drag Racing RSX
    Anyone here recommend the best setting for the launch control / 2-step settings for maximum traction and launch?
  11. Problems & Solutions RSX
    Whenever I have AC on the climate control knob is turned all the way to the cold side. I know if I turn it close towards to the hot side its not a cold. So my questions is if that's because a slight heat is turned on or if the AC is working less? So basically if there a such thing as medium...
  12. Transmission & Drive Train RSX
    Just got word from MTEC Ind. that they will be releasing a Shift arm much like the K-Tune shift arm, but it will have a OEM style setting AND side to side short throw setting that K-Tune does not offer. I have been waiting for this news a long time, and is the reason I was encouraging those who...
  13. Suspension, Chassis & Brakes
    I just installed my KONI Yellows with Einbach Pro-kit springs. I'm waiting for 2 new strut bolts so the car is in the garage until Friday. But I was wondering what setting should I start off on? I have the KONIs set to full FIRM as a starting point. I'm just worried about setting it to something...
  14. Problems & Solutions RSX
    I've looked everywhere and couldn't find full instructions on calibrating a new tps. I get to where you have to measure the volts or whatever but am confused as to exactly how and what to do. Can somebody please help me with this. Thank you.
  15. Suspension, Chassis & Brakes
    Hey i need help asap im trying to adjust them since they are riding too harsh can someone tell me wha setting they have it from the softest seting? Basically how many clicks away from "L" or "h"? I have 05 type s and streets of ny and is my daily driver thanks
  16. Problems & Solutions RSX
    Friday when i was driving my ac just stopped blowing. No cold, hot, defrost, nothing. I checked all the relays under the hood, checked the fuse box, and still cant find the problem. Anyone here had the same problem and know a possible solution? thanks. i have an 03 type s
  17. Suspension, Chassis & Brakes
    I've got everything in, and i'm just wondering how many clicks i should set the front and rear to for a stiffer yet still ok for street driving. I don't drive the car everyday, and when I do its for short periods of time. Just want to have a little fun.
  18. Suspension, Chassis & Brakes
    hey guys, I have a a buddyclub rear camber kit and I was running what is the maximum NEGATIVE degree camber i can adjsut with these camber arms. I have buddyclub N+ coilovers if that helps. Cheers!
  19. ECU Tuning RSX
    wrong section sorry :(
1-20 of 89 Results
Top