Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 107 Results
  1. ECU Tuning RSX
    So I have decided to ditch my primary 02 sensor and run off my mtx-l, I wired it up to analog 0 now I just need to input the 02 voltage/A/F ratio but not sure of what values to use so I can program the mtx-l. One more thing, engine won't start if the primary 02 sensor is disconnected, am I...
  2. Car Audio, Security, & Electronics RSX
    So I recently installed an Alpine ILX-007 in my 05 type s. Wired everything up and got power and sound but I cannot get my head unit out of demo mode. The settings button isn't lit up. I can't get into my settings for some odd reason. Did I wire something wrong? Am I missing something in my...
  3. Auto X & Road Racing
    So I have done 3 track days since running the caster plates and I have a few questions and comments. First off, mine are crazy crazy loud with the binding and popping noises. (I just read the thread someone posted about the same issue if thats what you want to call it.) That doesnt bother me...
  4. Photography
    I just bought a canon t3i and I wanted to take a picture of my car on day light and at night but idk what's the best settings for it and I have a black RSX 2005. PLEASE HELP! :pray::pray::pray::pray::pray::pray:
  5. ECU Tuning EP3
    Im picking up a greddy kit cheap and i dont have money for kpro so im grabbing an emange blue... but since its not preset for the ep3 greddy tuebo application i will need to know all the dip switch setting and wht to dial in... any take a pic of there setting or tell me how? Thanks!
  6. Suspension, Chassis & Brakes
    I have coilovers on my car, with fk-453's on 17's. I use to use these settings back when I had A-spec suspension. Camber Front = -1.5 Camber Rear = -.75 Toe front = 1/32nd toe out Toe Rear = 0 Keep in mind I just daily drive my car and don't track it or autocross. I just want a semi-aggresive...
  7. ECU Tuning RSX
    So I'm having issues with my MAP sensor. Or we think MAP cause now it could be wiring. Is anyone else running a GM 3Bar map sensor? If so what MAP are you telling Kpro and or if using the custom option what is the Scalar and Offset you are using? Right now when I set the MAP to Neetronics...
  8. Suspension, Chassis & Brakes
    This may be a stupid question - but it has been so long since I have messed with my damper settings. How do I know what they are currently set at? I think I remember reading that when first setting them, to be very careful not to click them too far. So I am assuming they do not stop when...
  9. Wheels & Tires
    i have a set of 17x9 +30 rims with 215/40/17 tires coming. I was wondering what are the camber settings i would have to run to prevent rubbing but at the same time be low (tucking a bit of tire) all four corners on the car has been rolled. thanks
  10. Suspension, Chassis & Brakes
    im lowered on function form type 2s and im on ap2 v1 wheels 17" x 7.0", +55 offset, 215 tire tucking tire half an inch. what should my allignment settings be in the front to prevent rubbing from the inner sidewall? thanks
  11. ECU Tuning RSX
    FINALLY! got the engine in and everything so todays start up day what settings do i need to change and any special procedures I need to do please send me a cal or just say it here...thanks. and its a 05 tsx block k20a2 built head no oil cooler thanks.
  12. Car Audio, Security, & Electronics RSX
    So.... couple newb questions.... in relation to settings... ive done my research but still confused:firemad: i currently have pg rds65cs front running off a ss rub2.250. I know the comps come with crossovers and im sure the settings on the xover are just as important but since there buried...
  13. ECU Tuning RSX
    Guys forgive me as I can't for the world figure out how to upload the datalog on here. The best I can discribe is...TPS is at 1%...IGN bouncing between 6-8deg. RPms pretty steady at 750+ I did a datalog of my idle. The timing on my Low speed cam angle seems iffy. My idle is set to 750. Tables...
  14. Suspension, Chassis & Brakes
    Trying to figure this out...... Installed Buddy Club RSD coilovers and had huge toe out with very little negative camber. Was able to fix the toe to get it straight. Now if I add a couple degrees of negative camber is that going to toe in my wheels meaning I will have the adjustibility to toe...
  15. Car Audio, Security, & Electronics RSX
    I have one alpine type r 10" matched with the alpine mrp-m500. My headunit is the pioneer avic d3. can anyone tell me what i should settings should i use for the amp? also, along with the d3?
  16. Transmission & Drive Train RSX
    what up rsx heads? Just got my pspec I would like to know whats the setting most rsx members use? I know I could set it to my liking but which setting seem to work best for most? Good looking out crew!
  17. All Motor RSX
    Any tips on valve lash settings for using A3 exhaust rocker arms on both intake and exhaust cams? I was using the recommended stock settings for A2 intake/exhaust, but felt like more power was made using a more loose setting (+.005/.010) but the valvetrain made a bit more noise Any insight...
  18. Car Audio, Security, & Electronics RSX
    So I FINALLY got around to hooking up my system and there's some problems. First, here's my settings on the nine.1: - Strap mode on Master - Bass Boost on 0 (full CCW) - Phase at 0 (full CCW) - Low Pass set at 60 Hz - Subsonic Filter set at 10 Hz (full CCW) - Bass Eq Center Frequency at 20...
  19. Car Audio, Security, & Electronics RSX
    What are people using their DTA settings? I just installed the kenwood x993 and am having some trouble deciphering the diagram in the manual. It talks about distance, height to ear etc. but in the DTA section of the stereo there appears to be just three settings Front 0.00 ft Rear 0.00 ft Sub...
1-19 of 107 Results