Acura RSX, ILX and Honda EP3 Forum banner
setup
1-20 of 474 Results
Advanced
  1. Bolt-On Basics: RSX Type-S
    So recently I bought a Type R axleback along with a 05-06 Type S midpipe, and with that I purchased a Megan racing downpipe. The sizing is 2.5” for the downpipe, I know the type s midpipe is smaller so I don’t know if my exhaust setup will fit, any advice helps! Thanks in advance!
  2. Problems & Solutions RSX
    If anybody has set one up for an 02-04 rsx with an 06 trans please give info on the wiring
  3. Suspension, Chassis & Brakes
    A little more clarity; this is for a project (not school, I'm 62), so disregard camber/caster gain, ride height, etc. On a stock RSX, starting with a stock alignment, wheels and tires, if the front strut is moved inward one inch, how many degrees of camber are gained? Bonus question. If anyone...
  4. Wheels & Tires
    I've been searching the forums but I can't get a definite answer. I am debating between getting 17x8 +35 wheels with 235/40 tires or 17x9 +35 with 245/40 tires. Will either of these rub? I am lowered modestly.
  5. Bolt-On Basics: RSX Type-S
    Hello everyone, I have an 05 Type S with the only "performance" mods being a Megan Shorty, Magnaflow stainless cat and a J's Racing 60RS. Planning to collect the parts over the next few months and sending the ECU out for reflash while I install everything (have to take time off work since it's...
  6. Turbo RSX
    Hey guys, I was wondering if anyone has a sidewinder setup that still has their AC and PS.. I was hoping to see some pics of how you guys managed it... Wanted to know if it is even worth the hassle.. I know room becomes a problem once running a sidewinder setup. Would converting to electric PS...
  7. Wheels & Tires
    I’m looking for what people think are the best looking wheels on an 02 black rsx! I know that “best” is very subjective, but I want to see some different ideas for wheels I can get on my rsx that will both look sweet at meets and perform great on the track. I’ve been looking for rota...
  8. Want To Buy or Trade RSX
    I don’t need fuel pump nor injectors. Planning to go e85. So I only need fuel rail, all lines that goes into the fuel rail and return lines, and fuel pressure regulator. Lmk what you have.
  9. Turbo RSX
    Getting straight to the point here, Ive been an rsx owner for a year. shortly after being an rsx owner i went with a JRSC supercharger. i melted a piston with it likely from exceeding the efficiency range of the charger so the idea came up LETS GO TURBO. and instead of buying a kit, i built...
  10. Bolt-On Basics: RSX (Base)
    Hey guys I am buying parts for the vtec killer set up I just want to double check I am buying the right things. I have a 05 rsx base, can the rockers and cam come from any year type-s? 4x K20A3 exhuast rockers (I heard A2 rockers give better mpg? can someone confirm this? and should I use the...
  11. Bolt-On Basics: RSX Type-S
    Looking for some advice on how to approach my current exhaust problem. I am current running a K-tuned slip fit racing header (4-1 i believe) to a Invidia Q300 catback exhaust. This is all connected by some POS test pipe with a slight bent flange that is currently leaking. I'm wanting stock level...
  12. Forum Threads
    I apologize as I realize the Bose amp to bypass or not to bypass issue has been much discussed on here, but I feel like I've gotten to a specific enough question that I just wanted to post a new thread, as I couldn't be certain I was doing this all right trying to piece together info from...
  13. Wheels & Tires
    Hi , I need a setup of wheels that will fit my BBK. Thinking of 17x9 255/40 Front but what ET ? 17x8 225/45 Rear but what ET ? Don't want to rub fenders , will not go really low but some fitment will be nice :)
  14. Bolt-On Basics: RSX Type-S
    Just looking over this forum seems people like the PML k20 header for the set up. Wouldn't a 2.4l header for a tsx work better? I've been looking into getting this https://www.hptautosport.com/products/k-tuned-rsx-race-header-k24-swap-krh-rsx-k24-krh-rsx-k24 would really like one cheaper like...
  15. Suspension, Chassis & Brakes
    i was thinking about getting this spring set up i am going to get these truhart shocks http://www.ebay.com/itm/TRUHART-SPORT-SHOCKS-ACURA-RSX-02-04-FRONT-REAR-SET-SHORT-STROKE-PERFORMANCE-/252317167642?hash=item3abf46701a:g:d~4AAOSwr7ZW4zUx&vxp=mtr and i am going to put on these eibach sportline...
  16. Bolt-On Basics: RSX Type-S
    Hey guys. So I just installed the intake mani w a 74mm throttle body. Then my cai wouldn't fit. Just wondering if anyone knows of any intakes that would fit.
  17. Want To Buy or Trade RSX
    Looking to buy 02/04 RSX -S brake setup (axles knuckles wheel hub rotors calipers brake lines) Master cylinder + Brake booster would be nice. 04/05 same plus front lower control arm. Rims as well. Make me a deal, ship to 93309.
  18. All Motor RSX
    I'm looking to build my head . Thinking of supertevh valve train and skunk 2 cams . I drive the car daily about 200 miles a week . Looking to see what setup would give me 240-260 hp and be reliable . Currently 221hp with cai , htech header , RBC intake mani , 3" custom exhaust with k tuned...
  19. Turbo RSX
    Hello crsx members, got a few questions about a tentative turbo setup and just gotta get some doubts off my mind, i got an 02 rsx with the following mods: -stock K24a2 from an 08 tsx -type s oil pump -3"kteller exhaust -Plm headers -rbc manifold -type s throttle body -kpro tuned ( just made it...
  20. Bolt-On Basics: RSX Type-S
    Howdy...got a few questions. SO I am going from my HKS 60mm exhaust to a Kteller 3" kit.....I have an OBX header currently. I want to make sure I have all the ingredients to do so smoothly. 1. 2.5" vibrant performance 3- bolt flange & gasket to mate header test-pipe outlet to new 3" exhaust...
1-20 of 474 Results
Top