Search Results for ‘setup’

Momo Monte Carlo 350mm wheel - $100 FIRM!!! Comes with red MOMO ITALY horn NRG QR, and NRG slim hub SOLD Text me 626-991-4420 IMG_1759 by leninscazares, on Flickr IMG_1760 by leninscazares, on Flickr

2005 Base RSX Speakers: Polk Audio DB6501 on front with Polk tweeters. Stocks on rear. Headunit: Kenwood KDC-X798 I'm new to this. I'm quite content with what this setup will provide as im not looking into building the best sound setup. Please provide any recommendation. So far, I've...

I was interested in running Supertech dual valve springs as well as titanium retainers on my z1. Would I be able to run stock keepers/valves with these springs and retainers with Prayoonto stage 2 cams? Or do I need to get Supertech keepers as well because oem wont work? Looked up much...

Has anyone removed their AC Components and re routed their serpentine belt??? I believe it can be done and would appreciate any advice or tips....

Ktuned idler pully setup with bolts and belt.$140 Bwr catch can setup never used. Comes with fittings hoses clamps filters everything$340shipped Type r valve cover with spoon oil cap. $220

I would need the following parts. knuckles, the hub and bearings, caliper assembly, wheel sensors and the Si brake lines and EP3 ebrake cables.

Hello everyone, about 3 weeks ago i had my motor rebuilt K20 head/k24 block, valves, 12.5:1 compression pistons, retainers, skunk2 stage 3 cams, 1000 ID fuel injectors, fuel rail, fuel pump, k24 head gasket. my problem is my timing chain keeps jumping time and also breaking. i have the k24...

Hello everyone, about 3 weeks ago i had my motor rebuilt K20 head/k24 block, valves, 12.5:1 compression pistons, retainers, skunk2 stage 3 cams, 1000 ID fuel injectors, fuel rail, fuel pump, k24 head gasket. my problem is my timing chain keeps jumping time and also breaking. i have the k24...

Hey everyone. Looking for some parts so I can start my build. Fuel pump Fuel rail Fuel pressure regulator w/ port for boost 1:1 boost compensation High flow fuel filter Fuel feed and return lines Oil feed and return lines Oil pan with return port Blow of valve Hondata boost control solenoid 4...

How do you guys have your coilovers generally tuned. I know there are about a million different combinations of dampers, spring rates, brands, and different methods/setups. What I'm asking is for STREET use. List your spring rates, and what damper level works best for you!!! Currently I'm...

Hey guys I have complete CT engineering setup I want to sell Located in the Modesto Area Very close to 300HP and running great. This is coming off a 2002 RSX Type-S $1700 - CT Engineering SC with 3.3 Pulley complete setup.( I just took it out of my car today!) $100 - STRUP Racing Header...

I'm setting up a simple NOS dry shot setup and I'm trying to make sure I can eliminate the nitrous pressure regulator and extra solenoid that came with the kit since I will be controlling fuel thru K-Pro. This is how the kit would normally be plumbed. This is how I'm gonna plumb it.

So I wanna do a staggered setup on my 02 dc5. However I'm a bit skeptical of the measurements I have to use for my wheels. What would be the best measurements of the wheels and tires to give the rear that nice wide look?

I have Work Emotion CR KAI 18" x 7.5, +42 offset all around. Which size of spacers should I get, or is there anything else I can do to make them flush? They are wrapped in 225/45/18 tires. Thanks!

Hi, First off thanks for looking.The time has come to really bring the car back to stock in prep of selling the car. Truly my loss is your gain. Alot of blood sweat and tears went into this setup. Please let me know any questions you may have. I am not looking for trades and The setup is off...

As pictured, Selling complete. $50, willing to ship within USA Here is a picture:

hi, i`m a noob here, and read through a lot of threads, but could`t find the exact answer i wanted, i`m looking at a set of enkei pf01`s in a 17x9, with a +40 offset, will these fit without rolling the fenders? i`m also looking at a set of tein street flex coil overs, as i want that...

Read through the long newbie thread aalready. Learned quite a bit...i plan on purchasing the godspeed racing/ turbonetics kit and not pushing anymore than 7psi or so. I want fast response and rreliability. I plan to replace all oil lines and fittings with qualit pieces, as well as couplers but...

SSR Rep Prefacelift JDM front Has some shipping dents. Body shop will have to do a simple fill on a couple spots but nothing serious. $700 Shipped with CTR lip and OEM type-r rebar JDM Rear Bumper with lip and custom rebar The tabs are broken on the inside but its a easy fix. I'll fix it...