Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 53 Results
  1. Bolt-On Basics: RSX Type-S
    Tried searching many forums but couldn't really find anything on mobile. Looking to buy a k&n crankcase breather filter and need exact sizing. I believe the valve cover hole size is 5/8 in and need a filter with a nipple of 1.00 in diameter correct ? SIDE NOTE: I accidentally ordered a 2 in...
  2. Problems & Solutions RSX
    pls delete
  3. Wheels & Tires
    I am getting ready to pull the trigger on a set of rims. I am going to be running 18s, what i'm not sure is the width/offset to get. my car is on ff2's and i would like be able to dump it all the way PLEASE HELP
  4. Wheels & Tires
    Hey guys, I currently drive a 2008 Honda Civic Si sedan, and am looking to get in to doing some auto-x'ing. I would like to run a 16 wheel, and the 02-04 RSX-S wheel seems like the perfect option. OEM quality, light weight, and can be picked up for cheap. My question is, since the wheel is...
  5. Wheels & Tires
    i wanted to see if anybody had a good idea on the largest size you could go without rubbing for an 02 rsx-s?
  6. Wheels & Tires
    Hey guys i tried looking but what are the MOST AGRESSIVE tires possible that would fit my ray g games? I WOULDNT MIND GETTING SPACERS IF NEEDED 17x7 +42 Offset i looked at the sizing chart 225/45/17 is the IDEAL size but i wanna get BIG tires THANKS!!
  7. Bolt-On Basics: RSX Type-S
    I have a 3 " k teller exhaust that i need the flange to bolt to the cat. been looking at the ones in the crsx store. will the 3" 3 bolt flange bolt to the stock cat?
  8. Turbo RSX
    I searched and couldn't find a whole lot of specific info on the topic. It seems like most people choose a GT3076 or GT35R turbo for their higher horsepower builds. But what about anyone looking for less horsepower, say around 350-400? I'm assuming a GT30 might be kinda laggy for 350HP? From...
  9. Wheels & Tires
    Hey All I am looking for a new set of Stock OEM Lug nuts for my 2003 Type-S My current lugs seem to have rusted outt over the years and need replacing... Im currently using 1.6EL lugs on it (Civic 2000 EK) as temps and they are way too long and stick out... Look dumb like some James Bonds...
  10. Wheels & Tires
    Hi guys, Wanted to get some perspective on tire sizing. Read everything I could find with the search function in this section but was somehow left with no definitive perspective. Getting the Potenza RE960AS Pole Position tomorrow but trying to decide between the 205/55/16 (stock) and...
  11. Bolt-On Basics: RSX Type-S
    read in a forum somwhere and found this out...... Fuel injector sizing is a little bit complicated, but a general rule of thumb is that you need an extra 100cc of injector flow for every addtional 75 hp at the crank. That means if you want to go from 227 hp (stock WRX) to 300, you'll need to go...
  12. Wheels & Tires
    ive got stock 17 wheels on with stock BALDING tires...maybe like 10% tread dropped on coils with a zero finger gap all around... ...the stock size is 215 45 17...if i buy brand new tires...i think i wanna go 215 40 you think i will have any issues with rubbing or with turning...
  13. Exterior Mods RSX
    ok so i got a type s. I got some 5 zigen fn01r-c 17x8+35 nothings really wrong with these. Now my question is what if i were to go 17x7.5 + 32 will i need to roll my fenders?? or 17x8 + 32 offsets?? i cant really tell the difference. Im still a little knoob about all this wheel spacing stuff...
  14. Exterior Mods RSX
    So I bought an 02-04 rear red H to add 20 HP to my car. I noticed that the size of this is kinda small and I've seen much bigger and cleaner ones. I'm guessing that the 05-06 ones are the bigger ones I've been seeing. I'm also assuming that these 05-06 ones fit on an 02-04 as long as they're...
  15. Turbo RSX
    Hey guys, Ive searched but to no avail. Im wondering what alot of people are running for intercooler sizing? Whats the biggest you guys are running? Hieght wise, depth, and length. Thanks for the help.
  16. Wheels & Tires
    whats up guys, tried searching for this one but couldnt finde anything specific. i have 17x7 rota circuit 10's. what would be the best tire size for these wheels? obviously i wanna go as wide as i can without any mods or issues or anything. thanks guys
  17. Turbo RSX
    Hi good day. I imported from Japan an already turbo charged ep3 type r. Stage 1: Car already came with full greddy kit, 2.5 inch exhaust, using the greddy emanage blue to control fuel with 440cc injectors. I found the t517z was fun for a while but lacked the upstairs i wanted.None the less i...
  18. Wheels & Tires EP3
    Was thinking recently that I might try some wider shoes on my poor little 15x6.5 Konigs. The money isn't there for a new set of 16x7's, and I'm going to need new rubber soon due to some alignment issues. So, anyone have experience with this? My theory is that by going with wider tires, I at...
  19. Wheels & Tires
    Im in the process of getting some rims. I am more into going fast than looking good. The question I have is this.... I know the stock wheel size for 02-04 is 16. Im gonna upgrade to 17's. I know that the extra 1 inch of rotation is going to hinder perfomance however will the reduced weight...
1-19 of 53 Results