Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 367 Results
  1. Exterior & Interior RSX
    alright so this is how i’m looking rn with 17s, i’m on lowering springs and i can’t really afford coils, so would it look retarded to throw some 15mm spacers and then camber it to like -3<? or would it make the fitment nice?
  2. Problems & Solutions RSX
    So i just finished installing 20mm spacers up front to make room for the brembos i just got, and figured I’d do 15mm in the rear while i was swapping out all of my brakes anyway. Fronts went in super easy, tapped them in with a hammer to start then used two oversized nuts with a lug nut to draw...
  3. Wheels & Tires
    Finally upgraded to an Avid1 06 18x8, 114.3, 73.1, 225/40/18 - can't seem to find a straight answer on spacer measurement. Can anyone help with a definitive answer and source? Remzo
  4. Wheels & Tires
    Hi, This is my first post so bear with me. I just got wheel spacers for my car in what I thought was the right size (64.1mm CB, 5x114.3 etc). But when I got o install them, the brake rotor bevel was so wide that the spacer wouldn't fit flush onto the surface. Not sure what size spacer to get...
  5. Wheels & Tires
    Hey guys, I ordered a pair of these http://www.devsportusa.com/HR-Trak-Plus-5x1143-Wheel-Spacers--10mm-Honda-Acura_p_904.html Spacers themselves are perfect fitment, studs however will not go in. They are m12x1.5 and thread my nuts. The problem is the splined part of the stud that is supposed...
  6. Wheels & Tires
    Hey guys, so this is a 2 part question I recently installed SSR GTX01 with specs of 17x9 73.0mm x 21.0, Offset 38. I realize that I will need a min of 5mm Spacer. Will I also need hub centric ring?
  7. Want To Buy or Trade RSX
    Pm me asap! Thanks.
  8. Transmission & Drive Train RSX
    Does anybody know how thick the spacer is that comes with the OmniPower CMC? I need to make a spacer from scratch and can't find the thickness measurements anywhere.
  9. Wheels & Tires
    Hey guys, I just pick up a set of Enkei RPF1 17x8 .45et in front and 17x9 .45et on rear, Currently I'm running Stock 17x7 .45et wheels with .25mm spacers on Tein S Tech springs which give approx. 1.7" drop in front and 1.6" in rear. It's pretty flush to the fender from front to back, a little...
  10. Wheels & Tires RSX
    I have a used pair of 5mm hub centric wheel spacers. Perfect for those of you who want to fit 17x9 rims in the rear. Price: $70 Location: San Bernardino, Ca 92405
  11. Wheels & Tires
    Hey guys quick question picking up a set today of rpf1 17x9.5 +38 with 245/40/17.. What kind of spacer am i looking at to clear the rear trailing arm? Any idea?? I know i will have to roll and possible pull fender with atleast neg camber of 2.5-3 .. Need advise on spacer ..5mm or 10mm ??
  12. Wheels & Tires
    So today I put my 17x9 +25 wheels and 225/45 tires from my tsx on my rsx just to see how it fit and I loved it! I currently have 17x8 with 245/40 on the rsx. Now the question is what size spacer would I need to match my 17x9? And what tire would I run? The tsx tires are slightly stretched. I...
  13. Problems & Solutions RSX
    Hey guys! In the process looking at replacing my tires, and I just had a fitment question. I'm currently on S tech springs and looking to fit a 225/45/17 tire on my stock 06 type S wheels. If i add a 30mm spacer (rears), does any know if this will rub? Cheers
  14. Want To Buy or Trade RSX
    I am looking to buy a the foam cover that fits over the spare tire on a base model RSX (without the Bose subwoofer). PM me if you have one available.
  15. Wheels & Tires
    Hey guys I'm pretty new with the whole suspension criteria with spacers and offsets etc and I just wanted to check that what I want do will work! :o I have a 03 rsx types, I replaced the stock 03' wheels with the stock 05-06 17" wheels. The car also has lowering springs on it front and back not...
  16. Northern California For Sale: Local Pick-Up
    Looking to trade my 25mm bolt in spacers for 15mm bolt in spacers. These spacers were sold on here from sn: tday. Made in USA 6061 material, worked perfectly for me. Or for sale $75.00 picked up.
  17. Canada East: For Sale & Want to Buy
    Hey guys, pretty self explanatory I'm looking for the 2 rear bumper stays or spacers that are needed to do the rear 05/06 conversion. Part numbers are: 71593-S6M-013 71598-S6M-013 Also looking for the OPDS and pretensioner for an 02-04 rsx as I'm throwing the famous SRS code. Thank you
  18. Wheels & Tires
    What's up guys, I drive an 06 type S. It's lowered on eibach sport line. So right at 2 inches all around. I want to run a spacer on my stock type S wheels. What size do u guys will fill that wheel gap and make it look more flush? 20mm, or 25mm? And are spacers off ebay a bad idea?
1-20 of 367 Results
Top