Ok so i just bought this car back in July. It’s a 2006 type s. Initially i planned to use it as a stock commuter car but well...stock is boring. Anywho, i did an rbc, cai, s2 rh and ktuned exhaust almost all in the same week. Of course the primary o2 sensor got damaged swapping over as they...
I have a 06 RSX Type S everything was running fine until the battery died. Now when I start the car the tach and speedo immediately rotate counter clockwise as far as they go. Speedo needle goes to about -20 mph and tach goes just below the 160 mph.
From what I can tell the car still runs the...
just installed hondata kpro using boomslang jumper harness, verified VSS turned on to 05-06 in kmanagement and still no speedometer operation. is there a way to just tap the original ecu harness pins to the kpro itself?
I have a 03 type s with 140k and I noticed my speedometer reading is inaccurate, way off. I'm going 40mph but my speedo is showing 51mph. Also the rpm needle is a little bouncy, not bad idle bouncy I mean it's actually bounces up when acceleration almost like the actual needle is loose. Idles...
Hello I am wondering if there is a way to adjust the speedo on my 05 type s to the 4.3 final drive i installed. Maybe the 02-04 speed sensor will do the trick since they have the 4.3? I was boosted and had kpro but now bringing it back to stock except im keeping the 4.3 and wonder if theres...
Hope this doesnt double post.... (posted earlier but didn't show up, I apologize if it double posted)
Before I start this off, I replaced my starter since it was going out a few months ago and everything was fine until recently..
Pretty often (maybe once a day) when I go to start my car I will...
I'm considering final drive gear change to improve acceleration for my 02-04 rsx-s.
So, I'm indecisive between 4.7 and 5.0 FD. :)
And I'm worried about speed meter error after changing FD.
My plan is to stick on stock ECU.
I want to know whether speed error should be considered or...
So I've been having this intermittent problem with my speedometer. It will read higher (as seen) than the actual speed. It happens before I even turn the car on, and it continues to read 2-3 mph higher than the actual speed, as I drive.
It seems to happen more often when it's cold outside...
WHAT IS GOING ON?
Okay long story short, I changed the transmission fluid but forgot to plug my VSS back in - I drove the car for a mile, realized the speedometer wasn't working, drove back and plugged it back in.
Ever since my speedometer hasn't been working.
Fast forward some time & now my...
123k miles on cluster. JDM AP1 cluster with pigtails and speedo healer for a rsx turnkey.
Cluster is 9/10.
Asking $400.00 obo for everything
Shipping from 32566
Text 850-621-4100 or PM for questions or offers
So i purchased an 03 rsx previor owners swapped tranmission to an 06 type s with the the speed sensor in the front. He purchased a $200 hybrid racing speed converter and the car was throwing a cel for the speed sensor..either way i replaced speed sensor and the cel wen away...but speedometer is...
Hi there, I have the code P0500
What would happen is my speedo would work for a few moments then stop working.
I switched out the Speed sensor on the transmission and now the speedo doesn't work at all.
When I pulled the old piece it was covered in corrosion.
I've even tried putting in the...
looking to buy
Driver side Windshield garnish
Clean ITR 02-04 Front "H" Emblem
Speedo healer for S2K Cluster
looking for any of these items
text me if you got them maybe we can work something out
Hi ive been searching all day an cant come across on how to make my speedometer work on my 02 Base model RSX.
I have a 5 speed engine harness, auto dash harness. Everything is working properly im just in need on how to wire/repin to get the speedo to work. Thanks in advance.
What's up everybody?
A little issue here.
Shop changed VTEC solenoid ( actually just replaced filter/screen) and next day my speedo starts getting jumpy. Didn't do it for like 10 minutes then hit a big bump and it started again. Makes me think loose wire to VSS or something? Brought it back to...
I am 99% sure I have made a mistake wiring up the harness.
Details: complete K20A2 swap with Hondata ECU. I cut the engine harness and the E connector (and separated the O2S harness) from the donor's body wiring and wired up the ECU by Hondata's "K-Series ECU Wiring" diagram. The car starts...
Guys, I have recently installed an 05-06 type s gearbox into my dc5 type r and need some help to get my speedo to work. I have a kpro ver 3 and have just found out that hondata has to modify the ecu before using the 05-06 vss option in kmanager. So the question is, will a gearbox speed converter...
i have a 03ep3 5 speed case with 1-4ppg straight cuts 5rsx and 6tsx with 4.7 final drive..... the ep3 and 02-04 rsx uses a different type speed sensor thant the 05-06 rsx. I wasnt necessarily worried about the speedo not working i just wanted the ecu to read speed so I can use 2step and vtec...