Acura RSX, ILX and Honda EP3 Forum banner

street

  1. Problems & Solutions RSX
    The old suspension has a tapered hole where the tie rod would drop in at. The new coilovers don’t. It sits higher than the old setup. Here’s a pic. Any comments? Is this normal ? Am I missing something ? everything ive seen says these should be plug and play. the tie rod ends definitely dont...
  2. Bolt-On Basics: RSX Type-S
    I bought a Ultra street manifold this morning. Tried to install it on my EM2 and there isnt enough clearance, its hitting the radiator support. :snap: The store wont take it for an exchange because I tried to install it. :thumbsdow Does anyone have a pro series manifold they are willing to...
  3. Suspension, Chassis & Brakes
    Hello, new guy to the forums here. Thought id post here to get some advise on what to do. I have had the Ktuned street coilovers for a little over 2 months. They rode pretty good for the first couple of miles. Little by little i would get a really bad cracking noise like something metal was...
  4. Suspension, Chassis & Brakes
    Hello everyone, I just bought an 04 rsx type S and I'm planning on getting some coilovers. I was looking at the Tein Street Basis Z Coilovers on ebay (Link listed below). Before I pull the trigger I just wanted to make sure I'm buying the correct package with all the components needed for the...
  5. Exterior Mods RSX
    Hey all, I just wanted to post my rear spoiler mod to get some feedback. I purchased my Type S for a daily driver and when I bought it the previous owner had removed the Type S spoiler (I would have done the same). I really felt like the car needed some kind of spoiler to finish off the rear...
  6. Auto X & Road Racing
    I'm planning or running my '03 RSX Premium in H Street next year and am looking into rear sway bars. I know there are the usual suspects (Eibach, H&R, Progress) but I'm concerned that some of them might be too much for the stock mounting points and the Progress re-enforcing panels aren't legal...
  7. Suspension, Chassis & Brakes
    About 1/2 way done, and man it's been a lot of work. Due to the low level of corrosion on the bolts I thought life would be easy, but it's fought me all the way. I got the front bushings in and got discouraged to do the rear when the rear shock bolt froze and had to spend a gob of time dealing...
  8. Northern California For Sale: Local Pick-Up
    Sold
  9. Exterior & Interior RSX
    Sold
  10. Suspension, Wheels, & Tires EP3
    hi, this tein is for RSX and have the 16 ways adjust, the one for ep3 doesnt have the adjustment. just need RSx tie rod ends or any else to install on ep3 and have good performance? one more advantage, the RSX kit can use EDFC systems thanks lmk
  11. K Series Parts
    just under $615 shipped, 16 way adjustable and from Tein! https://www.kseriesparts.com/merchant.mvc?Store_Code=CR&Screen=PROD&Product_Code=TEI-GSA28-9USS2
  12. Exterior Mods RSX
    I've been looking for this since 2011 but i ended up nothing. In fact, this particular Street type axleback from Spoon has been long discontinued esp for the DC5 chassis. I tried contacting Spoon Japan, Spoon Europe and even searching on ebay in Japan but they couldn't provide even a used one...
  13. K Series Parts
    New Release from Hawk, designed to test the limit with your ABS brake system. have a bit of each in stock and ready to ship, if you have any questions feel free to ask! https://www.kseriesparts.com/cr/HWK-HB361B-622.html https://www.kseriesparts.com/cr/HWK-HB145B-570.html
  14. Transmission & Drive Train RSX
    its 2016 and i still have problems with the springs coming out lol just had another exedy stage 1 go on me, its been on for a little over a year at 28k miles. i seen the unsprung street disc from act and thought i would give it a try and since my pressure plate has low miles i thought i would...
  15. Suspension, Chassis & Brakes
    Does anyone have the manual came with the coilover? I lost mine and I am trying to find out the suggestion ride height in the Adjustment of Ride Height section. 20mm?
  16. Turbo RSX
    Wondering if there was a way to turbo an rsx type s with emmisions testing. Whether it takes custom work to do so or not. I do not live in california. Thought about getting a PO box with a physical address with a suite number but I dont know if that will pass. Before you guys say anything I am a...
  17. Member Show-Off RSX
    Hi all, I recently reviewed two very different modified RSX Type-S models for my Youtube channel. It's a classic comparison between form vs function. The videos are ~20min each so grab a drink, lean back, and enjoy. All feedback and constructive criticism is welcome. Thanks! 2003 Acura RSX-S...
  18. Suspension & Brakes RSX
    I just bought my coils and the camber kit about 2 weeks ago, they havent left the box at all.. So really brand new, I am selling them because yesterday driving through Angeles National Forest, I hit some ice and I lost control of my car and I rolled and my car ended up being totaled. I bought...
  19. Southern California For Sale: Local Pick-Up
    Name your price and come pick them up in 90017 today or tomorrow 31st or the 1st. I am moving on the 2nd and do not want to travel with these. I don't recall the exact mileage but by the end they were getting a little "bouncy" and will probably need a rebuild soon (if not now). The titanium...
  20. Member Show-Off RSX
    Hello and welcome to the beginning of my first RSX build. This will be mainly a record/journal for myself and future record to look back on. This build is not for internet fame and is purely for my own enjoyment. Some of you just may not agree or accept some of the mods I have planned out for...
Top