Search Results for ‘subframe’

Was hoping to get advice on this problem. A while back while swapping sway bars i was wondering why the front sway bar bracket bolt wouldnt tighten. Turns out the nut inside in subframe somehow broke off and now theres no nut in there. I got it looked at and the mechanic said the only way to...

rsx subframe free I have a type r hood from a dc5 type r. It has a couple of dings. so it would probably need some work. $30 Located in bay area

as the title says. good condition 2005-06 SUBFRAME. looking to replace my rusty one and powder coat new one. let me know thanks!

I just bought an '02 RSX-S for $800 (needed timing chain/tensioner only!) but found that my rear subframe brace is rusted almost in half. I have tried locating it on an online parts catalog but have no luck finding it! Google results also show nothing but these fancy aluminum rear control arms...

Hey all, I was wondering for those who have adjusted thier subframe for more caster, how much more degrees of caster was gained? I'm looking to do the same to equalize my caster and maybe gain some more so input is appreciated. Thanks!

I would like to buy a subframe in good condition/minimal rust. Base A/T, M/T, or Type S. All DC5 Subframes are the same, right? (...different part #'s) PM or text (6zeroeight) 3fourfive -82seventyone any time.

Hi all, looking to drop the transmission in the RSX and want to make this a 1 man job that goes as smooth as possible. Does anyone know where to get this subframe support tool (not the jack) that's listed in the shop manual? I've tried looking for this tool in the snap-on shop for honda/acura...

Found can close

So i was driving in some seriously heavy snow, and messy roads. I came over a hill nd long story short, I slid at about 30 mph straight into a sharp 4 inch curb. The car got towed home, and the subframe is bent badly on the passenger side, among a broken wheel and collapsed control arm and other...

[/URL] I'm sure this has been covered 20 thousand times, but if you want one more POV. Here was my install of the Black Works Racing lower control arms, sub frame brace, and Beaks bar on YouTube... Click here https://youtu.be/Udy2I3mSbtg Just one note, I installed the sway bar brackets...

Hi all, i need to take off my subframe, is it anbig deal to remove? What do i need and i was wondering if you guys as any advice about it, tricks or anything else to make it easier. How to do it and easily. What about the torque for the bolts, do i need to put locktite when i'll put it back on...

Looking for 2006 rsx type s front subframe Prefer local so i can pick it up

Hey guys, This will be a bit lengthy, so hang in there. I purchased my RSX Type-S this past summer. The car had 187,000 on the clock, and allegedly, the previous, previous owner had installed a new clutch. I had no physical proof of this, although i did have a good, firm clutch pedal. The only...

9.5/10 condition. LCA | 200.00 SHIPPED Subframe brace | 240.00 SHIPPED F7 Oversized Swaybar bracket | 15.00 SHIPPED F71 by Jordan Dc5, on Flickr f72 by Jordan Dc5, on Flickr

So several years ago, my car jumped a curb pretty bad because I hydroplaned. Anyways, the entire passenger side suspension was pretty off. The rear LCA was completely bent so I swapped that out. The front showed no sign of bents, cracks, broken parts anywhere, or even body damange. However, when...

As the title said, the part number is 74230-s6m-j00

All parts are from a 2005 Acura RSX Type-S. Lowballers will be ignore. NO TRADES Located in Orange County. Pick-Up ONLY! Text 562 230 3327 UPDATE Buddy Club Short Shifter w/K-tuned Shifter Arm - $180 Universal 8mm Wheel Spacers (Will Fit: 5X114.3, 5X115MM, 5X120, 5X120.7)- SOLD Pioneer...

WTS function 7 complete subframe setup with the special socket to open the LCA i got it new pay around 500 for it!! now i no longer need it! i have another project! feel free to throw me offer! txt me 7148375002 locate CA 92683 (westminster) pick up only

just got this 2004 RSX Type-S 2 months ago and I was doing the alignment on it and noticed the rear driver side subframe had been previously damaged and is affecting my rear alignment. the other side is fine its just this face. what should i do to fix this?