Acura RSX, ILX and Honda EP3 Forum banner

suggestions

  1. Bolt-On Basics: RSX (Base)
    Hey guys, I've been researching the past couple of days trying to find the smoothest coiler system I could get for my DD. Any suggestions help!
  2. Interior Mods RSX
    so i am on planning getting new front seats for my type s i am planing on spending no more than $600 on both i saw nrg's fixed bucket seats they looked pretty good but idk if they are any good? any suggestions?
  3. Transmission & Drive Train RSX
    Hello, I have a 2nd gen RSX Type S. I got the car a year and a half ago during Fall. On early spring, my cmc blew, so I replaced it with a new em2 nissin one, but hastly bled the system. I adjusted the rod also, and shifting was smooth as butter, but after a couple of months, it came back to a...
  4. New Member Introduction RSX
    Hey there. Went ahead and pulled the plug, decided not to cheap out and bought myself some Anzo headlights (hurt the wallet a little bit), along with tail light turn signal red-outs, plus a decklid spoiler. Really excited to see how it all comes together on my silver 02 Type S. What kind of...
  5. Wheels & Tires
    Whats up, currently looking for a set of tires to go with my RPF1s. These are the specs: 17x10, +18 offset. Looking more for performance but something that can be daily driven. was thinking about Nitto; like their the NT05s or NT05r or NT555r. If anyone has tried them would be helpful to...
  6. All Motor RSX
    Hello, I mostly lurk but have posted a handful of times. I have an 02 Type S and I am glad it is not a 5-6. I have been the second owner since 140kKm/87kmi and it is currently at just over 180Kkm/112Kmi My current setup is: -ECU: KproV4 . In case you are wondering about v4. I find the...
  7. All Motor RSX
    I looking at rebuilding my High mileage k20a2 in my Rsx soon. I would like to gain some NA performance during the build as well. I'm looking to spend about $2000-3000 dollars and would like to be able to hit 250 whp. I would like to maintain the high revving nature of the k20a2 and possibly rev...
  8. Exterior Mods RSX
    My RSX has the Mugen front bumper and was looking for a proper fitment preferably with minimal adjustments; suggestions would be greatly appreciated, thanks!
  9. Exterior Mods RSX
    I just bought a 2004 rsx base, im looking to put new wheels and tires on it. What size wheels and tires do you guys recommend?
  10. Forum Threads
    okay so only mods I have is completion clutch stg2 ultra fly wheel and cai injen also straight pipe 2.5 in to catalyst converter now I am new to this and just want some ideas for gains I wanted to do a frank motor but just thinking of the head achs ect or just turbo but generally speaking...
  11. All Motor RSX
    So I recently started a Frank. build k24a2 bottom a2 head. so far just got the block back from the machine shop with forged wiseco pistons and rods CP 11.5:1 compression. I have everything for boost already but not really in a rush to use it I really want to try this all motor thing first. I...
  12. Problems & Solutions RSX
    What's up dc5 fellows. Ok so I'm having an issue trying to figure out what's causing my check engine light to be on and why my car isn't preforming like it should. I had the codes checked and it's saying a random Misfire P0300, P0301, P0302, P0303, and P0304. About a month and a half ago my...
  13. Problems & Solutions RSX
    Car fires, but won't turn over. Listened at gas fill door per Helm manual- heard no pump noise. Checked fuse and it's good. Car started once after winter storage and won't start again. Do I assume fuel pump is bad? Don't really want to go through long "check this, then that" procedure...
  14. Turbo RSX
    Hi guys, wanted some feedback on my current project. As mentioned earlier, I packed up the Greddy Kit and got a Full Race Kit with custom parts. Engine Build: Darton MID Sleeves Wiseco Pistons Acura RSX K20A2 K20Z1 86.5mm 9.8:1 Manley Turbo Tuff Rods Acura RSX Civic Si K20A1 K20A2 ACL Race...
  15. Car Care Showoff RSX
    Hey everyone! (Sorry if this is in the wrong spot, please move if needed). So I have a 2003 Mitsubishi Eclipse and the paint IS REALLY BAD. In the pictures below you'll see. But I'm very new to detailing so I don't know if I should use certain products over others since of the state of my...
  16. Problems & Solutions EP3
    Hi, I have a stock 2003 SIR hatch and there is an exhaust leak at the cat where it bolts to the rear pipe. The flange is rusted pretty heavily and I can't tighten the bolts or replace them without using heat which will almost definitely crack it. The cat and replacement exhaust from Honda are...
  17. Car Audio, Security, & Electronics RSX
    I would appreciate some advise on what headunit I can get the best deal on right now. Preferably with all the bells and whistles like backup cam and dvd, and I also want apple car play. I know there are threads already but technology changes and I would like someone who is familiar with the...
  18. All Motor RSX
    Hey Clubrsx! Car is an 2002 Acura RSX Type S Recently ran into a problem which I am saddened to say is probably a rod knock. Give me your inputs on what I could do/might be able to do! Was thinking about k24 bottom end rebuild :O? Video is below me in the attachments, check it out and let me...
  19. Bolt-On Basics: RSX Type-S
    The car I bought has a Nvidia Q 300 exhaust on it. It's a 70 mm pipe sizing which is ideal for my set up, but it's just a little too quiet for me. I like it to be a little louder but not super loud, the K tuned exhaust sounds good in my opinion. I was thinking of just cutting off the muffler...
  20. Suspension, Chassis & Brakes
    Hi, There I just recently bought a 2002 RSX type S with 219,xxx miles on it and counting. The only reason I bought the car with this amount miles on it was because, the price was right and the enigne had the head gasket, timing chain tensioner, and pistons, as well as clutch, all with less than...
Top