Search Results for ‘swap’

my best friend has a k24a2 swapped Base model RSX and it's had some issues since the swap. we fixed the crank sensor and the car ran great until he parked it for about 8 hours to go on a road trip and when he came back the car just wont start, we're assuming its something fuel related because...

I recently bought a type-S with a K24a2 swap in it and it had no power steering. I realized the old owner had swapped the serpentine belt for the power steering delete pulley so if anyone needs the info for the serpentine belt, here it is: i used a duralast multi V belt with the part number as...

hi guys, this is my first post so don’t go too hard on me. I currently own a 05’ Acura RSX Base Auto. The previous owner swapped the original motor with a 02 base auto motor. Does that mean that he had to swap out the ecu for the different engine? Or do you think he kept the original ECU...

Recently i swapped my rsx type s from a 6 speed to a 5 speed. This is because it was ran with no fluid and burned up from the previous owner. I was driving it around for a few months with the 6 speed after going threw it thinking it could be fixed. Obviously i went the cheap route and just did...

I have an 03 RSX Type S and I plan on swapping a K20A into it to but i'm concerned with whether I absolutely need to get the motor from the DC5-R or if I could put the CL7-R motor in. Only reason i'd rather get the CL7 K20A motor is because it is siginificantly cheaper than the DC5's K20A. What...

my 2002 RSX type S rusted out, so I picked up a cheap 2006 clean RSX Type S shell. What do I need to do harness wise to swap a K20a2 (I have stock harness, ecu, engine, a2 trans) into a 2006 type S shell? I would like to use the 2006 cluster, but I want all my gauges to work Lead me to swap...

I have a 03 rsx type s with a 5 spd trans. My head on my k20a2 has blown, so im getting an a3 for now. Do the headers,manifold,water pump alt, ect bolt onto the k20a3? Im also assuming id need the a3 engine harness and ecu. Thanks For The Help.

Hello to you all! I’ve searched so many forums on here and elsewhere looking for answers to my issues and there is no definite answer to my current problem! I have a 2005 Vivid Blue Pearl RSX Type S A-Spec.The k20z1 died a few months ago and now I’m doing a K24A swap from Japan with an RBB-4...

So I’ve been told by a couple of friends and by my tuner that I can use my stock ecu( my 03 type s ecu) on a k24 as long as I have kpro installed is this true somebody pls let me know.

So I'm in the process of a k24 swap into my type s long story short I'm not sure of the exact block or head but it's a jdm k24a vtec head so I bought it as a bare longblock so I'm using all accessories from the type s and also the ktuned intake adapter, ktuned upper coolant housing, my type s...

What's up everyone so I just bought a "07" k24a to go in my rsx. Didn't really want jdm but that's what I ended up with. Now the motor has 3 lobe camshafts, says RAA on block, RBB on head and rbb on the bottom side of intake mani. Any help confirming identity would greatly be appreciated. And a...

so I picked up a k20a2 to flip...but I’m keeping it now, it’s stock from oil pan to valve cover, here’s what I would like to know, with modern turbo technology I’m looking to make 400hp crank if not 400 wheel hp with quick spool, this will be going in a rwd car that’s approximately 3400 pounds...

Hi All, I'm currently in the process of doing a k24a2 swap into my base 03 RSX. The engine is from an 04-05 TSX. I fully realize and anticipate some will tell me to search the forums, and I get that, I really do. However, I have searched extensively, through this community and many others, and...

I saw a 350Z shell on craigslist and it got me thinking of a K24 350z. Any thoughs on this or how much of would even be to pull something like that off?

I'm interested in getting an RSX. But I like the red exterior, especially the 2003, and the black interior. Sadly the red exterior was not available with the black interior. Has anyone here looked into the cost of having the entire interiors swapped between two RSXs? Alternatively, would it be...

Hey All, I am doing a k24a2 full swap in my 03 rsx type s. my goal here is to do the swap on a budget using parts that I already have (Which is almost everything). I also have a black 02 rsx base that I wrecked the other week. So, I will be using parts off of that to help save on cost. The type...

Hi I’m new on here and I own a 2004 Rsx type S it’s also my first car. Long story short a month after buying the car the engine blew after taking it to a shop for an oil change. I never got to know why it blew but I took the opportunity to change things up so I bought a K24a2 of a tsx. The car...

Hello everyone, greetings from Panama friends ... I am building my project of the DC5 base 2002 K24A2 Turbo sidewnder Automatic. The ECU does not worry me much since I will adjust with Ktuner for 05-06 + the Harness for 02-04 ... I have the opportunity to get a TSX transmission, the question...

Long time lurker, recent poster... Have a 05 Rsx Base and looking to swap in a 04 k24a2 and a 6 speed transmission (not sure which trans yet). Question is what to do with the wiring harness and ECU? I only have the charging harness. From my research it looks like I'm limited to finding 02-04...

K24/k20 swap on rsx. I’m installing the catalytic converter and it doesn’t seem to fit. The engine is some inches away high. I’ve forced it but now I don’t have clearance. The catalytic hits the top of the shield. What am I doing wrong?