Acura RSX, ILX and Honda EP3 Forum banner
swap
41-60 of 463 Results
  1. Problems & Solutions RSX
    I have a ep3 motor swaped into a 2001 civic ex with what I believe to be is a 06 type s 6 speed couldn’t be sure unless anyone knows tranny codes for those years I can’t find it. Which Ecu do I need to buy I ordered the tucked k series engine harness and the 01 civic dash harness conversion...
  2. Bolt-On Basics: RSX (Base)
    Yes I have searched and searched with no luck. I have an 02 rsx auto and access to an ep3 trans 5 speed for cheap . I'm wondering if following Brian g instructions for the rewiring if I can wire the manual vss into my auto ecu and trick my ecu into drive or nutreal and use until I get a new ecu...
  3. Interior Mods RSX
    Hi I'm 6' tall and cannot sit comfortably in my 06 type-S with a helmet on. I could use another inch or so of headroom, and the best option seems to be finding an aftermarket seat with less cushioning. I'd like to continue to use the stock seatbelt as well. Car is a daily with ~10 race (autox...
  4. Problems & Solutions RSX
    Hi guys so I just got a new engine for my type s since I messed up the first one. Everything was connected and I started the car. My dad revved the crep out of it for a while. Then we noticed white smoke coming out from where the headers are. My dad said that maybe it was old oil that it was...
  5. ECU Tuning RSX
    Looking to do a head swap on my 06 Acura RSX Base. I heard that the K20A2 head will bolt right on to the K20A3 but the ECU will need to be changed. My RSX is automatic and I'm wondering if a Type-S ECU will work. Also, would it be better to run a K-Pro ECU rather than a Type-S ECU? Thanks!
  6. Problems & Solutions RSX
    Hello ClubRSX! I have scoured the bottom on the internet with no avail. I have swapped an EP3 EPS into my car, wired up, was running fine for a while. i am sure that the rack has a bad torq sensor thus the PCM is throwing a code disabling the rack completely. Since its swapped, there is no...
  7. K-Series Swaps
    So I got a Type s with a k20a and I blew the motor. Basically the block is seized. Since I don't have the money to buy a new type r, I wanna know what kind of options do I have with getting something a little cheaper. I was thinking about putting in a k24, everything is pretty much type r...
  8. K-Series Swaps
    I’m swapping an ’07 K24a2 engine into an ’06 base RSX 5-speed. I’m not planning to put in the type-s oil cooler. I’ve read a lot of information on various forums. I have some confusion, as some people mention swapping to the K20 water pump, thermostat, and idler pulley / auto tensioner and crank...
  9. All Motor RSX
    Hi, i have an 02 RSX Type s that is consuming a lot of oil(at least a quart a week) and has now been overheating a bit. The temp gauge has gone higher than half way but less than 3/4 of the way. Shes not pulling as strong now as well. I am currently debating either rebuilding or swapping a CL7...
  10. Bolt-On Basics: RSX (Base)
    Hey guys. I been out of the game for a minute since my engine blew. Anyways I am looking for a reputable shop in the Charlotte NC area to do my swap. I originally had it done at KMod Performance (was a straight swap). Was recommended to go to RLZ Engineering but don't see much review on the...
  11. Southern California For Sale: Local Pick-Up
    Unfortunately i have to sell my k swap. Was going to use it for a project but things came up. Im selling the whole kswap. Engine, transmission, harness, shifter cables, shifter box, hondata kpro, immobilizer with original key. Literally EVERYTHING for a kswap for 3000. Its going to come with...
  12. Bolt-On Basics: RSX Type-S
    Which sway bar from the EM2 should I be buying for my rsx if I want more clearance for my RH? There are two, the 15.9mm and 25.4mm and alot of places say different things. I do plan on tracking the car next year so far I haven't decided on which rear sway to get (help would be appreciated...
  13. Forum Threads
    I own a 2004 acura rsx premium (base), automatic, and the body is clean and mint condition. I have 200k km and winter is only begining but after winter i know my engine will be at its time, so im planning on swapping it for JDM HONDA, ACURA RSX K20A TYPE-R DC5 ENGINE, MT 6 SPEED LSD...
  14. Problems & Solutions RSX
    I have a 2003 rsx base automatic. So I recently bought a jdm transmission swapped it out now I have a flashing D and it’s reading a code p0768 solenoid D electrical. Car turns on and drives but doesn’t shift automatically into gears I have to let go of the gas at 3000k to shift to 2nd and then...
  15. Bolt-On Basics: RSX (Base)
    Sorry if this has been covered, I was unable to find it. Hondata has a technical article saying the base auto ECU can be used for swaps. https://www.hondata.com/tech-alternative-ecu-engine-swap I have a base auto that I want to swap to k20a2 (or k24a2 all depends on availability) and...
  16. The DIY Garage RSX
    Looking to do a k24 swap! Help... So I found a k24 Odyssey engine bc there are no TSX engines available. I've done my research seems like all the specs are the same for the engines. Any major issues THAT I should run into with swapping it into my type s?
  17. K-Series Swaps
    Hey guys so im planning to swap a k24a2 into my base 2006 rsx. I have a place that will swap the stock engine with a low mileage k24 for only 1700CAD which i think is a solid deal. I was originally planning to buy an engine and build it myself before swapping but i think for 1700 i cant really...
  18. Forum Threads
    Hey guys, I'm new to this forum. I recently traded for a 2002 rsx type s with a k20a swap and was told it needed a new harness, I put the one that he gave me in and it wouldn't fire, after researching I found out it's the immobilizer that's causing it not to start and the k20a ecu doesn't have...
  19. Forum Threads
    I am curious what other years of RSX's are compatible to a 2002 Acura RSX - (2.0L) - Manual Transmission - 8 is the 8th digit in the VIN# Thanks!!
  20. Suspension, Chassis & Brakes
    I know I’m beating a dead horse here and I’ve gone though countless of threads reading about what is needed for the swap... My setup is a bit different then most because I am bolting the parts up to my Honda Element. I recently purchased jdm dc5r brembos with knuckles and LCRs. I know that I’ll...
41-60 of 463 Results
Top