Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. General RSX Discussion
    Hello everyone, My 02 base rsx is just my daily driver. Bone stock. Have 297k miles on it. Just looking to replace the front suspension completely with aftermarket, low cost parts as I have some shot struts, bad ball joints and who else knows what (haven't fully diagnosed everything). I've...
  2. Want To Buy or Trade RSX
    As the title says, folks. If you have one let me know! Thanks in advance!!!
  3. Problems & Solutions RSX
    Was hoping to get advice on this problem. A while back while swapping sway bars i was wondering why the front sway bar bracket bolt wouldnt tighten. Turns out the nut inside in subframe somehow broke off and now theres no nut in there. I got it looked at and the mechanic said the only way to...
  4. Want To Buy or Trade RSX
    I’m installing a skunk 2 header. I’ve heard there may possibly be a fitment issue. Regardless of select opinions. I’d like to pick a sway bar up so I don’t cus the header install fitment. Shipped to 98607
  5. Suspension, Chassis & Brakes
    I didn't realize the progress bar used adjustable end links when I bought the hardrace OEM links last year. Will these install correctly or cause anything crazy as far as the vehicle dynamics go I should know?
  6. Suspension & Brakes RSX
    Selling these new never used Anti Sway Bar sets from ST Suspension. Selling as a set only for 350$ Free shipping. These are brand new, never used ..just missing the box. Thanks
  7. Problems & Solutions RSX
    When I put the car back on the ground the sway bar is resting on the control arm and it is actually fuqn up the control arm... did I put it in upside down or something Sent from my iPhone using Tapatalk
  8. Suspension & Brakes RSX
    larger 05 front sway bar with end links. $30.00 local pick up in Virginia
  9. Southern California For Sale: Local Pick-Up
    05-06 Type S exhaust manifold, midpipe, muffler - 100$ (selling as whole) Type S stock airbox - 60$ EM2 sway bar - 70$ 02-05 Civic Si/ 02-06 RSX Innovative transmission mount - 100$ Pick up only, text me at six two six 833- 36 seven zero
  10. Problems & Solutions RSX
    Already replaced front, looking to replace rear, someone told me that they are universal from front to rear. It that true or not?
  11. Suspension, Chassis & Brakes
    I have a Progress 24mm rear sway. Previous owner installed, didn't know it had spherical end links, and I already bought the hardrace OEM links. Just curious what my options are here? If I need to run sphericals, or if I could run the Hardrace ones and if I do what are the effects of that...
  12. Bolt-On Basics: RSX Type-S
    I’ve installed my invidia race header and noticed that it’s running on my swag bar is the best fix is to grab an em2 sway bar? And if so would I need To remove my header to install the new sway bar?
  13. Bolt-On Basics: RSX Type-S
    I’ve installed my invidia race header and noticed that it’s running on my swag bar is the best fix is to grab an em2 sway bar? And if so would I need To remove my header to install the new sway bar?
  14. Suspension, Chassis & Brakes
    I replaced the worn sway bar bushings for some fresh energy suspension ones, but now my car pulls to the right. Before the car was fine, I checked under the car but everything seems ok. I'm replacing the clutch in a couple of weeks, so I'm getting an alignment after that. I want to make sure...
  15. Problems & Solutions RSX
    I was trying to figure out if i could use the hardware thats on my oem rear sway bar on a aftermarket eibach one i was going to have installed, any help would be appreciated. Thanks
  16. Bolt-On Basics: RSX Type-S
    So I have a ITR sway bar which is way more clearance than a type S. I have maybe 1/4 inch clearance all around with suspension loaded. When the car gets jacked up the wheels bring the sway bar down and it hits the header. Other than that fitment is great. Oil filter removed, never had to touch...
  17. Bolt-On Basics: RSX Type-S
    Which sway bar from the EM2 should I be buying for my rsx if I want more clearance for my RH? There are two, the 15.9mm and 25.4mm and alot of places say different things. I do plan on tracking the car next year so far I haven't decided on which rear sway to get (help would be appreciated...
  18. Suspension, Chassis & Brakes
    Anyone have a progress sway bar? Is it any good? I'm getting a good deal (at least I think), a brand new progress sway bar, skunk2 rear lower control arms, ingalls sway bar end link kit for both right and left side. All for $150. Good deal or no? Sent from my iPhone using Tapatalk
  19. Bolt-On Basics: RSX Type-S
    I'm planning on getting the Eibach sway bar kit. Will the sway bars rubs with a setup like plm RH and a ktuned catback? Sent from my A1 using Tapatalk
1-19 of 500 Results
Top