Search Results for ‘sway’

Im looking for JDM DC5R Front LCA and JDM DC5R Sway Bar, if you either or please let me know how much shipped to Canada! Thanks

Genuine Cusco front sway bar; 25mm in diameter. Will come with the bushings, but no endlinks. Need DC5R knuckles to run this bar; unfortunately I did not realize that when I purchased it. Bar has around 1,000 miles on it and is in great shape. Taking a loss here! 175 shipped. Pictures sent to...

Anybody know if there's any clearance issue with PLM header and ITR front sway bar? Undergoing ITR alum LCA/ITR sway bar swap, but not sure if it will fit with the PLM RH. I know PLM is a USDM style header, but it seems like the depth of the curves of ITR and USDM sway bar is around the same...

Hi, Not sure where to ask this question but if I wanted to run a ITR front sway bar with ITR LCA's, do I have to run a JDM header? Will a Ktuned header work with the ITR sway bar or does it have to be JDM ITR headers? Thanks

For the installation of the rear sway bar, is there anything else that I should buy so that I could replace while I am at it in installing the sway bar? I was told about lower control arms and endlinks and grade 8 washers. Are those actually needed or could I go without those things? Thank you...

recently bought an ITR Rear Sway bar from ICBMotorsport. It came with what appears to be ITR bushings. 2 questions: 1) will these bushings fit inside my type-s brackets? 2) does anyone use these? if so, how r they? do you recommend an aftermarket brand like ES? Bought Ingalls endlinks also...

Hey Guys, So I have a buddy with a spare 22m Progress bar off an 8th gen civic. I've been trying to find out if it's interchangeable with my RSX for me to use. Guessing not, but wanted to ask and make sure. Thanks

I went and got an Integra Type R front Sway and Lower Control Arms to swap on my RSX, ready to install. Still using the stock exhaust manifold, but I'm curious if anyone knows which race headers shouldn't have a problem with that ITR sway bar. I've been looking at getting the K-tuned race...

SOLD! For sale is my 23mm Eibach rear sway bar that was professionally powder coated bright red by Paul at Columbus Powder Coat. The Eibach specific bushings are included in the sale. This bar was purchased new in 2015 and I have only 2,000 miles on this bar total! I removed it from...

Sold!!!! For sale DC5 Type R front sway bar. HardRace harden rubber 23mm bushings also included (part number 7449) This arm was stripped of the factory paint and professionally powder coated by Paul at Columbus Powder Coat. The color was changed to a nice bright red to match my other...

Who else is having clearance issues with the Invidia race header and sway bar? I spoke to a few members that have barely enough clearance and then makes contact upon spirited driving. I have tried the stock sway, Progress and EM2 sway bar and they all have same issue. Has anyone not had...

I have a set of Apexi EXv dampers for sale. They have 10K miles on them. Also a hotchkis front sway bar 27mm. I am asking for 600 OBO for the suspension 120 OBO for the sway bar You can text me on my cell 805-794-7273

Hey folks! First off I apologize if there's already info out there, I looked and couldn't find much. Today I purchased gently used A Spec suspension for my 02 Type S. The suspension only has about 2k miles on it. I got them for a really good deal, as well as a brand new Progress 27mm front sway...

ASR Rear Sway Bar kit for RSX/EP3 32mm x .188 hollow bar and another 32mm solid rear bar. The hollow bar is 50% stiffer than a 26mm rear bar, the solid one is 200% stiffer. This was used on my autocross RSX for about 5 months This may not clear your exhaust. I have a custom 3" exhaust...

Looking for a VTC solenoid not the vetc valve the one that goes on the side of the engine that is part number 15830-PNC-003. Looking for the positive cable which attaches to a few things including the starter. IF cheap enough a 05 or 06 rear sway bar off a type S. I am in GA 30144 so let me...

Sold http://forums.clubrsx.com/attachment.php?attachmentid=527793&stc=1&d=1487030448 Selling because it doesn't clear the plm header.

Decided I want to get with the beefier Hotchkiss Endlinks. Brand new in box $40obo shipped

I'm in TX and will pay actual shipping.

I'm planning or running my '03 RSX Premium in H Street next year and am looking into rear sway bars. I know there are the usual suspects (Eibach, H&R, Progress) but I'm concerned that some of them might be too much for the stock mounting points and the Progress re-enforcing panels aren't legal...