Acura RSX, ILX and Honda EP3 Forum banner

tap

  1. Welding, Fabrication, & Tools
    So I am in Wisconsin as some of you who have talked to me may now know. While I was out at a couple of antique/thrift stores I found this sweet Old Style beer tap. I decided to make a shift knob out of it. So, I took the bottom part off of it (not pictured), bought an SAE coupling nut, a...
  2. Problems & Solutions RSX
    It's just hanging by the right side and it's ugly any solution to fix this??
  3. Southern California For Sale: Local Pick-Up
    WTB 05-06 CHEAP all mess up dont care broken tap headlights text me 619-633-3699 thx Near San Diego area
  4. Problems & Solutions RSX
    I put a type r wheel in a few months ago. Love the clean look of it. And do not want to put controls on the wheel itself. I have 3 small buttons mounted in the coin tray to run the cruise control. Anyone know where and how to tap into the wires in the dash board. Please help
  5. Turbo RSX
    So i have had my turbo build for 2 yrs but the sandwich adapter for the oil feed is leaking. I don't want to use the sandwich adapters anymore and would like to run a oil line for the turbo from somewhere else. Is there anywhere else that I can can get a oil feed to into the turbo? Thanks.
  6. Part Outs RSX
    I have these parts lying around and I have no need for them (all items are brand new). Prices include shipping (US only). PM if interested. Gates K070810 Belt - $15 Gates K070786 Belt - $15
  7. Interior Mods RSX
    I'm installing a pair of Schroth AutoControl harnesses in my car, the retractors will be mounted at the rear shoulder belt mounts. The way the system works is you have a retractor and a motion sensor that detects if you are pulling over .5g in any direction and then locks the harness. Without...
  8. The DIY Garage RSX
    i am in the middle of installing a used greddy kit and it came with most of the stuff i need, but unfortunately not really. the thing i'm most conserned about is the oil flow. i know the oil into the turbo will come from the line connecting to the oil filter sandwich (as soon as i can find a...
  9. Interior Mods RSX
    ------
  10. Problems & Solutions RSX
    I have a 02 type s. It have 73k on it and I never hear the engine because I have such a load exhaust. But I put a Cai on so I kept the hood open when I started it. And the valves tapped pretty good. Once it's warmed the full way up it's perfectly fine is that normal. Is that normal? It's the...
  11. Northern California For Sale: Local Pick-Up
    15.25" H x 31" W size .25" thick transparent clear and smooth BRAND NEW never used. I bought from Tap Plastic and had them cut this specific size for a project I was doing. Now the project is scrapped and don't need this piece anymore. Great for an amp rack or display piece for your car show...
  12. Car Audio, Security, & Electronics RSX
    So I have a secret product that I will show-off once I figure out how to install it. First pics and something special (no ****) go to those who help, srs Where is the best place to tap into... -12v ignition wire -speed signal wire -running signal wire (idk if that's the best term?) Pictures...
  13. Interior Mods RSX
    Hey hopefully someone can answer this easily. :laughing: I want to put LED's under the dash, and have them on / fade out the same as the Dome light. I have heard i can run wires right from the fuse box? or whats the best way to do this? TIA.
  14. North East
    I need my oil pan tapped and welded for my turbo return line. Is there anyone in the south jersey area that can do this kinda work for me?
  15. Turbo RSX
    Does anyone have their oil feed tap from their turbo build. Im planning on drilling my hole in the pan next week when i do my clutch. But i haven't recieved my peakboost kit yet so im in need of the tap, fitting, and cap. If anyone has these parts please let me know. I need them asap. If you...
  16. Problems & Solutions RSX
    Hey fellow members, I own a 2005 mm type s and i have compared my motor with my friend 02-04 type s and i have noticed that my 05 k20z1 motor makes this weird tapping noise when idling. I got it checked out and they said it's not coming from my valves and assuming it is coming from my fuel...
  17. Nitrous Oxide RSX
    I have a Nitrous Wet Kit and I am trying to tap into the stock fuel rail to run fuel to my fuel solenoid.... I am just looking for some pics or something so I can get an idea of how to do it... Thanks Tim
  18. Problems & Solutions RSX
    so i recently bought my rsx type s used with 69,000 on it. and its a 02. i put 10w-30 royal purple in it. it taps thou. it is top end not bottom end. any ways to fix this? other then a valve adjustment? or could it be due that i simple have to heavy of a oil in it? i dont beat the car and let it...
  19. Turbo RSX
    Anyone using a AEM boost guage? I was wondering if I can tap the port next to our brake booster vacumm port on the RBC for the AEM boost sensor? Usually people have this port block off with the rubber stopper. Or it would be best just to tap the bottom of the RBC plenium for it? thx for input.
Top