target

I did some searching and couldn't find a good answer so I figured I'd start a thread in hopes of finding out what the ideal a/f ratio is for an N/A RSX-S. I just recently installed an AEM Wideband UEGO to accurately measure and record my afr at idle, partial throttle, and WOT. Now I need to know...

So with Kpro apparently we can only change the target AF in closed loop for idling but not for part throttle or cruising..? I thought changing the target AF under settings in the options menu would change what the o2 aims for under closed loop, and I haven't tested it yet but after doing some...

Can anyone make a GIF of this? Gets good at pic#11 http://xtremesportsphotography.photoreflect.com/store/Orderpage.aspx?pi=0QAK01AY080000&po=0&pc=28

http://www.motortrend.com/future/future_vehicles/1207_nissan_working_on_mini_z_to_target_frs_brz/#ixzz20tA8RxUn That front end in profile looks very Mini Cooper. Plus FWD or AWD, not RWD. Competition for the Mini, Mazdaspeed3, GTI, Focus ST, and such. Not BR-Z/FR-S track star material...

from http://www.ft86club.com he Toyota FT-86 pricing will be higher than originally planned. The FT-86 price will be upped in Japan from the original $20,000 starting price to $23,000 (with a fully loaded FT-86 being approximately $26,000). The FT-86 development team is also planning on...

It looks like NWHondas.com is meeting up again this coming saturday at 8 at the Federal Way Target Parking Lot. Is anyone interested in going????

What is the target af ratio for a car running e85

WUTS UP CLUBRSX .... IN CASE U GUYS DIDNT KNOW THERES A WEEKLY MEET GOIN ON EVERY FRIDAY DOWN IN THE BRONX.... LOCATION IS THE 225 TARGET PARKING LOT.... KOOL PLACE TO CHILL AND TALK ABOUT OUR CARS AND STUFF......40 W 225th St #50Bronx, NY 10463 THATS THE ADDRESS TO THE TARGET JUST IN CASE YOU...

Give me some feedback baby...

:thumbsup:

Bought these 2 items at Target for 75% off...not sure if they're good because I use mostly Meguiars but these were less than $2 a bottle :dontknow: There are more items on clearance but the only brands I see on sale are some Black Magic, Turtle Wax, Rain-X car wash soap (less than $1.50 a...

went to target today and nxt next generation tech wax paste is on sale for 3.99, I was in shock when i saw it for that cheap, original price was 15.99 so go check your local target before its gone. For those few livin in Durham, its the one on chapel hill blvd near sams club.

Hi just wanna tell u , ive reached my target. i just came back from the dyno , after 2 1/2 hours of tuning , i think i achieved one of the top whp for 9 psi on dyno jet . my car did 293whp and 198wtq @9psi on dyno jet. i think i did ggreat job and its an amazing result. am more than happy...

screw it, im going to use another method

I live at an elevation of 1100 feet. My car is an '02 RSX-S, and mods are in my sig. My first question is what should my target lambda be in columns 8-10? I know I can change the values in options-settings-lambda overlay, but not sure what those values should be for medium and high load...

sorry wrong place

What target AF ratio should I be tuning for. At idle/low rpm's I want 14.5 or so right. I know when I'm in boost I want 11.8 or so. What about for all the other parts of the rpm vs map cells? Also, does anybody know where I can find documentation on this lambda stuff within K-Manager?

Ok, So I've envisioned a targa top on the RSX ever since I saw it, I've always thought since the NSX gets one, why not the RSX? I've been talking with a local custom's body shop and the owner has been doing body mod's like and similar to this for over 20 years. I am still in the RESEARCH PHASE...

What does everyone with a turbo have their Target Lambda low, medium, and high load set at? I am trying to tune my kpro with a newly installed greddy kit. Thanks

The first few runs since install I would max out at 10psi <as per the setting>. Now I seem to be maxing out at around 6-7psi. Now, even shifting at 8200 I dont hit 10psi mark on my boost gauge. Maybe vac. lines too weak from maybe getting to hot and weakening? At what RPM should I be at the...