Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 25 Results
  1. CariD.com
    Whenever we order some aftermarket car accessories or performance products we often think about two things. 1. How to get the right part for your model? 2. Hot to install it? With CARiD Tech desk you do not have to worry about these sometimes complicated questions. Our experienced specialists...
  2. The DIY Garage EP3
    Hi I was wondering if the 2004 Civic Si Technical specs located in the sticky section would be the same for 2002 Civic Si(r)? Any answers would be greatly appreciated. Thanks.
  3. Problems & Solutions RSX
    I have a k20a2 with a pretty good build, and have a friend with a rsx that he bought a new motor for and it ended up being a k20a crate motor. So he got everything installed in the car and vtec won't engage. The car is at a lot and is intended just for sale only, so his primary concern is...
  4. Problems & Solutions RSX
    my car revs is dropping really low when i rev the engine to 2000 or greater than release the throttle. it drops to 500 then the iacv brings it up back to 800 quickly. i changed my throttle body, so that means new iacv, new tps, and used map sensor. the tps is in range....im getting .47 closed...
  5. Suspension & Brakes EP3
    Figured some of you would enjoy the read. Just makes me want a set of scales that much more.. http://www.powergridinc.com/tech.asp
  6. Supercharging RSX
    Im not good at explaining my self but here is the factual info I have and possible problems when some of this technical charasteristics are not followed. Hope this is helpful as we move forward. _____________________________________________________ The charger is really sensitive to inlet...
  7. The DIY Garage EP3
    ENGINE Type: Aluminum-Alloy In-Line 4 Displacement (cc) 1998 Horsepower @ rpm 160 @ 6500 Torque (lb.-ft. @ rpm) 132 @ 5000 Bore x Stroke (mm) 86 X 86 Compression Ratio 9.8:1 Valve Train: 16-Valve DOHC i-VTEC Fuel System: Multi-Point Fuel Injection Emission Rating LEV 2 Direct...
  8. Bolt-On Basics: RSX Type-S
    just thought this information was kinda interesting. it talks about the design of engine motor mount bushings
  9. Wheels & Tires
    So im in the market for new wheels. Ive pretty much got an idea of what look im going for so i know what style(s) i want. I've looked and looked, but the price of wheels sort of scares me away. Its hard for me to justify spending $1200 + on a set of wheels. How did you guys get around the...
  10. Suspension, Chassis & Brakes
    Ok so im sure we all know what camber is and what toe is. But can we have some kind of discussion as to how they contriute to the overall handling package? Posts from this thread could be used for the "thread of all threads" sticky in the future.
  11. Supercharging RSX
    http://www.germanmotorcars.com/Detonation.htm ^^^ good stuff. EDIT: a 'general' section for forced induction would be neat -- that way things that are common to all are available in one place.
  12. ECU Tuning RSX
    OK, well my engine is all back together after a lengthy 7 month span of 2 rebuilds all covered under warranty. I will be selling my IPS cams, as Honda did not reinstall them on the 2nd rebuild, instead they are supplying new ITR bumpsticks. They are worried about the aftermarket aspect even...
  13. Turbo RSX
    I had a debate with my friend earlier today regarding a BAR of boost. I was under the impression that a BAR of boost equaled 14.5 psi and not 14.7 which is atmopsheric pressure. Since feet above sea level would not be taken into account for, what is a bar of boost equal to? I always thought it...
1-14 of 25 Results
Top