Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Problems & Solutions RSX
    Are the stock battery tie downs conductive? My tiedown's coating was peeling and the metal was rusting, so I removed the coating and sanded the metal. Just as I was finishing up I realized the coating felt like electrical tape and was wondering if the tiedown is safe without it?
  2. Problems & Solutions RSX
    My battery tiedown bolt got swallowed by my engine bay and I can't find it, I checked the search but the only results were talking about the other bolt. Where could I find the battery tiedown bolt closest to the headlights? Or what are the bolt's measurements? Much appreciated :)
  3. Suspension, Chassis & Brakes
    I'm running coilovers and my OEM outer tie rod ends keep breaking after a while. Any advice?
  4. The DIY Garage RSX
    I replaced all 4 struts and the tie rod ends. I utilized KYB shocks and Moogs tie rod ends. Failed inspection because of that crap and the car needed a lil' bit of love anyway. You guys have see the steps to get the RSX safe and inspection ready. This is a simple and easy task that I personally...
  5. Texas For Sale: Local Pick-Up
    I’m selling a set of 0857 Inverted Tie Rod Ends. Despite their appearance, they’ve never been installed. I had them in storage for over a year. Asking $100. You can text me at 915 346-2068 for a quick response. Located in Austin. Thanks.
  6. Suspension & Brakes RSX
    Purchased several months ago, ended up not needing them. BNIB, never been opened. $100 + shipping Located in Atlanta GA Text me at 6783269327 for quickest response. *will post up pic of actual item tomorrow*
  7. Suspension & Brakes RSX
  8. Suspension, Chassis & Brakes
    I'm currently installing a set of BC Racing coilovers on my 03 type s. I've got the rears done so far... I forgot to get a tie rod tool prior to starting this project so the fronts are on hold at the moment. I was looking at the front end yesterday and my tie rod ends look like garbage and need...
  9. The DIY Garage RSX
    Decided to install some tuned inner tie rods to correct the issues I was having with being lowered. The tuned are adjustable inner tie rods meaning you can adjust the length to either bring your toe in or push it out getting your tires straight. It is a common problem for people who lower their...
  10. Problems & Solutions RSX
    About to attempt this just need to get the right tool and just want to make sure I'm doing it right so I don't waste my time so just looking for some insight. (seems like there's a lot of mixed info when you try searching this up with people explaining how to the outer tie rods ends.) saw...
  11. Suspension, Chassis & Brakes
    Just recently got my first dc5. Is slammed on raceland coilovers. I'm happy with that but obviously need to fix the tie rod angle. So opinions? Drill out hole and flip tie rods? Buy inverted? Buy bracket? If so where to buy? Thanks for any input
  12. Suspension, Chassis & Brakes
    I need help removing the inner tie rods on my 05 RSX! I tried looking everywhere for a DIY forum on the subject but couldn't. Is it absolutely necessary to remove the steering rack in order to get access to the inner tie rods? I understand that you're unable to fit an inner tie rod removal tool...
  13. Suspension & Brakes RSX
    Purchased thinking I was going to need for alignment, ended up not needing. BNIB, hasn't been opened. $135 shipped. Text for instant response. 678-326-9327 Thanks
  14. Canada East: For Sale & Want to Buy
    Does anyone have front camber kit, rear camber kit or inverted tie rods to get rid of? If so, send me a message. I am located in Toronto Thanks
  15. Problems & Solutions RSX
    The old suspension has a tapered hole where the tie rod would drop in at. The new coilovers don’t. It sits higher than the old setup. Here’s a pic. Any comments? Is this normal ? Am I missing something ? everything ive seen says these should be plug and play. the tie rod ends definitely dont...
  16. Suspension, Chassis & Brakes
    I just installed Raceland Ultimo coils on my RSX and when I put the tie rod ends back and bolted it I realized they were too short and my alignment was way off, the front wheels were crosseyed facing out. Reading online I realized that you do need longer tie rod ends if you are lowering your...
  17. Want To Buy or Trade RSX
    Looking for new or used 0857s. Pm or TEXT 210-710-6891 Thx
  18. Problems & Solutions RSX
    I am changing the coilovers on my 02 type s, and I am having trouble getting the tie rod end to completely press down into the seat on the front coilover anyone have any suggestions or experience with this?
  19. Engine & Transmission RSX
    Exedy Master cylinder never used: $30 shipped Exedy Slave cylinder never used: $30 shipped Honda tie rod ends never used: $60 shipped Stock air intake filter never used: cost of shipping + $5 Thanks for looking PM, text, or reply below 8645979908
  20. Suspension & Brakes RSX
    The 0857 Inverted Tie Rod Ends have been sold to Mr. Martinez. I also have a pair of Truhart rear camber arms for sale. They've been modified some for a little extra adjustment. 90$ shipped! :fistbump:
1-20 of 500 Results