tip

Currently thinking of going a straight 2.5” exhaust all the way from the cat and with a Greddy Revolution Rs tip. It would be for a base but will a base be able to crackle. Im all stock. Mostly in it for the sound but as well as an exhaust to put a smile on my face ? thanks (2002 Acura Rsx)

Looking for OEM stainless exhaust tip in very good condition. Part number 18310-S6m-A51. Paypal.

Just wondering what do u guys use to protect your bumper from the hot exhaust tips ? I’ve been searching around for heat shield for exhaust tips like I seen other cars use but can’t find none? Are they custome made?

Hey clubrsx, I'm having a tough time trying to remove the front hub (that's attached to the lug studs) off from the front spindle/knuckle. I am trying to replace my wheel bearings but cannot get anything to work. Both driver and passenger sides are seized. I already fudge the abs sensor plus...

Sup yo, decided I'd post my progress and somewhat of a DIY/tip guide to make an exhaust tip heat shields for a bumper. I see quite a lot of people with burnt bumpers due to their exhaust tip. I haven't had any problems myself and I know the proper fix is to just hang the exhaust lower, but I...

Does anyone know if the type S muffler has a slightly bigger outlet tip for a sportier sound? Or is it the same as the base?

need help here.i rarely push my car hard but last night i had a fun race with a friend. when i let my foot off the gas from high rpm(not redline) my buddy said he saw sparks coming out of my exhaust tip. i have an injen intake, ktuned race header and q300 catback exhaust untuned.am i just...

It is missing the burnt tip and has a slight dent under the exhaust (Not noticeable when installed and does not hinder performance) Replacement part # for the tip is GRD-11050106 Or you can use a RS tip, it will just need to be modded slightly to fit.

Sold

Hello, i am currently looking for a chrome exhaust tip for a 2003 acura rsx type s. Thanks

Hey all, Thinking of plasti dipping my break callipers and exhaust tip. Now, I have done some searching and it seems a lot of people have done it and not had any problems. I don't drive fast or hard (not a racer) and live in a cold climate (14 degrees Fahrenheit and less most of the time.)...

I have for sale a skunk2 megapower exhaust tip and a greddy evo 2 exhaust I'm accepting offers and willing to ship for the right price Call or text 646 3610632

Located in Santa Clara/Cupertino location.

I have an HKS exhaust with 60mm piping and a 115mm tip. I am planning on only adding bolt-ons in the future such as a rh and cai. I have read that with that set up I don't need more than 2.5'' piping but would the 115mm tip give me less torque/back pressure or any other disadvantage in gains. Or...

Was looking at exhaust tips on ebay and amazon. I've never purchased an exhaust tip, nor do I really know what to look for. I'd like a lower deep growl sound. I'm on a budget and am just looking for some recommendations. Thanks for your time.

"Just the tip" - Archer Searched for a while but couldn't find anyone selling the stock OEM Type S muffler tip for 02-04's Unfortunately mine fell off - Tightening bolt was rusty so I could not tighten it enough to stay on well. I'm sure plenty of guys drop the stock muffler first thing - So...

If you go to a TSX 6th gear swap in your K20 tranny (for highway economy), you must replace the 6th gear needle bearing with the TSX P/N 91103-RAS-003. It is 1mm thicker than the RSX/K20 one. If you don't, the main shaft gear 6th pinion will "wobble" and it will come off gear when running...

Basically, I have the exhaust, but my tip is gone (long story). I dont believe you can buy just the tip separate, unless someone here knows where? This may be a long shot but thought I would try and see if someone has the tip.

Looking to buy just the muffler tip of a 2003 RSX Type S. I Live in Canada but I am willing to pay for shipping. Thanks.

I have been searching on here for a clamp on/bolt on exhaust tip for my stock 2002 RSX base. Anyone know any good brands? I'm looking for a 4in" outlet if possible. :lostswimmer: