Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 37 Results
  1. Canada East: For Sale & Want to Buy
    I'm selling some extra parts I have left over from a track car build. Pick up only in Newmarket or Markham. All parts are authentic, no reps. DC5R ebrake handle - $120 Looks much better than the stock handle and has a large round aluminum button. Direct replacement for the stock handle and...
  2. Suspension & Brakes RSX
    Sold!
  3. Suspension & Brakes RSX
    SOLD!!!! Selling a very lightly used pair of the Todd's V2 Da Vinci Designs Camber Caster Plates for the DC5/EP3. These were used on an autocross car for 19 runs and about 100 street miles. In very good condition, with only some remnants of loctite on the threads of the Top Nut and a few...
  4. Want To Buy or Trade RSX
    Please pm me if you have a set to let go
  5. Want To Buy or Trade RSX
    Hey guys, Looking for a pair of Todd's modified tie rods for my DC5. I'm based in Western Australia and would be happy to pay the shipping cost. Cheers.
  6. Suspension, Chassis & Brakes
    I just installed a set of Koni's with Todd's V2 Caster Camber plates. I have the Camber set to minimum, and the ride height is at about 14" hub to fender. There's so much toe in that the car is basically undriveable. Has anyone used this setup before with stock Tie Rods? I can't use...
  7. Southern California For Sale: Local Pick-Up
    For sale is a pair of brand new todds adjustable inner tie rods for anyone running into toe issues. Brand new unused. I ended up not needing them here is a pic Asking 250$ shipped or $230 picked up. Since it's 259 + about 20$ for shipping from Todd. Text @ 7148236809
  8. Suspension & Brakes RSX
    For sale is a pair of brand new todds adjustable inner tie rods for anyone running into toe issues. Brand new unused. I ended up not needing them here is a pic Asking 250$ shipped. Since it's 259 + about 20$ for shipping from Todd. Text @ 7148236809
  9. Auto X & Road Racing
    I posted in the suspension forum with no replies, so I thought I'd try my luck here. I have Todd's V2 Caster plates on top of the Koni 8611 shock and eibach Ground Control spring/sleeves. I installed them a few months back and have noticed 2 things I am concerned about: 1) I get a lot of...
  10. Suspension, Chassis & Brakes
    I have Todd's V2 Caster plates on top of the Koni 8611 shock and eibach Ground Control spring/sleeves. I installed them a few months back and have noticed 2 things I am concerned about: 1) I get a lot of popping noises when turning the steering wheel. Usually at stop or low speeds, and happens...
  11. Suspension & Brakes RSX
    As above, ideally with 12mm perches and top nuts, however the plates are most important as I can get the other parts. Thanks Carl
  12. Suspension & Brakes RSX
    I sold my rsx couple months ago and don't have the use for these parts anymore. All prices are obo but not by much and no low balling please! Please email me at [email protected] or text me at 267 391 6764 Stance GR+ coilovers with about 6.5k miles on them. they are stiff but not harsh...
  13. Southern California For Sale: Local Pick-Up
    I have for sale oem tie rods. good condition no bends or stripped threads. i recently purchased todds modded tie rods and have no use for these. it is a cheaper alternative if you don't have the time to send your own tie rods to him or if you don't want to spend as much on brand new tie rods...
  14. Suspension & Brakes RSX
    no longer for sale
  15. Southern California For Sale: Local Pick-Up
    no longer for sale
  16. Suspension & Brakes RSX
    Complete tie rods w/ moog tie rod ends: Sold 05/06 Front Strut Bar $30 picked up I have a set of OEM wheel locks with the key that came with my car.Also will include the card that has the serial code for the key just incase you want another one or lost it. $20 shipped. Will post pics soon...
  17. Want To Buy or Trade RSX
    Let me know the details on what you've got and how much. :beerchug:
  18. Suspension & Brakes RSX
    Hello, Foolishly bought a set of these for a Ground Control/Koni combination. These don't so much work for a GC/Koni combination unless you want minimal suspension travel. Ie: may work for a track-ONLY car but not a daily driver. Moving on... These are essentially the finest camber/caster...
  19. Canada East: For Sale & Want to Buy
    Todd's OEM Adjustable Tie Rod: Basically, if you want more than -1.5 camber and or running out of toe when you have lowered your car too much, this will solve your problem. This will also reduce bump steer and increase handling see thread here...
  20. Suspension & Brakes RSX
    I am selling a set of brand new CASTOR plates made by Todd here on the forum. Never been used, comes with the adjuster tool\socket. $360.00 shipped withing the US also: TIE ROD BUMP STEER KIT (inner pickup point) see pictures $70.00 or get both for $400.00 SHIPPED. Read up on these...
1-20 of 37 Results
Top