Search Results for ‘tps’

hi? my ob2 port was working just fine. i got the code PO122 from it with my tester. trying to checking the resistant or volt on my tps wire. i unplug the plug from the tps sensor. i used a voltmeter. as i set up to test the wires, i plug the voltmeter black wire to battery ground...

I am tired of trying to find cheap k series tps modules only to have them fail half way down the road. So I am going to convert to the b series tps using the k tuned adapter. The question that I have that no one seems to post is where do you get your b series tps's? I don't want to run into the...

im looking for a good brand to go with for a tps but been having problems with my stock and was hoping you guys could point me to a good choice and where i can pick one up

Any diys on this?!:vtec:

Hi, I replaced the TPS on my Type S because it had been triggering a code recently. After I replaced it my idle started to be unstable (it was not prior to the replacement). The idle fluctuates around 900 +/- 50 rpm every 3 seconds or so. I did not disconnect any hose or stressed any wire while...

Does anybody know what voltage should the tps be at idle ? Sent from my iPhone using Tapatalk

any one here have problem setting the tps without a kpro. I'm running stock ecu and I can set the tps to the number they bring in the package

Sold!!

Hi, Car was not throwing a code before but idle was kinda weird when coasting and shift to 5th gear is jerky which led me to believe there is a tps issue. I bought a brand new one on ebay, calibrated it and it threw a code for tps voltage. Now maybe the sensor is just really bad but i switched...

2002 Acura RSX base Replaced the TPS over the weekend but could not get a good read to calibrate. Everywhere I have looked it says to place the multimeter on the red and black wires but there does not seem to be a black wire. Somewhere else I saw they just put the post on a ground somewhere...

Is this a legitimate Ktuned Hall TPS? Please notice the difference in the face of the sensor that mates with the TB. The top image is the suspect part, the bottom is a stock image from JHPusa

Hi, I've looked through various posts and am at a wall. My son has an 02 that had a bunch of custom work done to it when he bought it...boost, hondata, exhaust.... It has always seemed to run rich and had an idle surge. Finally it now won't run well enough to drive. We thought it might be the...

Hi guys, This is my first review ever so bare with me haha, also I'm in no way affiliated with Acuity instruments!!!Now with that said, I just want to share my positive experience, I first heard about the Acuity Hall Effect TPS I had no clue of its existence, so right away I googled it and...

First off I have an 03 RSX-s stock. My car idles at about 700rpms~ it use to idle at around 850rpms +/- 50. I can feel my car shake from the change in idle speed, also my fuel trim bank 2 is at around -14.8%. I have replaced: MAP sensor spark plugs both 02 sensors cat timing chain tensioner...

Good day to all. For the last couple years been using a k tuned tps sensor version 2. It worked well for the most part but it started to give alot of issues in the last couple months. I ordered a hall effect k tuned sensor. All the issues i had went away but new issues presented themselves. The...

Hey guys! kseriesparts.com just started selling our new hall-effect TPS for the RSX-S and we wanted to make a little post introducing the product. We'll try to answer any questions you guys may have. Link to buy @ kseriesparts.com: https://www.kseriesparts.com/cr/ACI-1879.html Link to spec...

So my TPS crapped out on me and was causing me to have crazy bogging issues, so now I'm looking for a new one. I've heard of people going through 4 or 5 oem TPS sensor's in their ownership of the car so I dont think I want to go back with OEM. So I guess what I'm asking is if there is a TPS that...

Searched and found good info on testing the TPS. Have a code p0122. I just need to positively identify WHICH is the TPS. 2 sensors on top of the throttle body. One has 2 wires, a vacum hose and is held on by 2 screws. The other has 3 wires and is held on by one screw (thats the one I think it...