Acura RSX, ILX and Honda EP3 Forum banner

usdm

  1. FS: OEM USDM & JDM Parts - ECU, Wiring Harness, Mounts, Alternator, Starter, etc

    Canada East: For Sale & Want to Buy
    sold.
  2. USDM Honda Airbag $175 shipped

    Southern California For Sale: Local Pick-Up
    USDM Honda Airbag Plug and play fits Acura rsx Red dc5 overlay Perfect to complete your JDM badges! Located in San Diego Asking $175 shipped Pm or (858)2489six37
  3. Canadian heated seats to usdm rsx

    Interior Mods RSX
    So im about to pick up some canadian leather heated seats with all the wiring and buttons to make them plug and play. My question is has anyone done this before. Are they plug and play or will my car throw air bag codes and such? Is it plug and play or is there any modding needed to make this...
  4. Usdm to jdm

    General Discussion EP3
    Hi everybody, been waiting for while but i finally got some parts I have a 2003 ep3 just bought: jdm fenders,jdm bumpers (rear & front),jdm hids head lights,the two jdm doors with panels now my question is will all this parts fit straight up to the usdm or I'm gonna have to do some modifications...
  5. Wtb: Oem Ep3 Usdm Steering wheel w/ Airbag

    Want to Buy or Trade EP3
    got it thanks!
  6. K20A (JDM Type R) swap into 2002 civic SI (USDM)

    Hybrid & Swaps EP3
    So I am doing the K20A swap in my 02 Si, and I think I have figured most of it out. I have looked at the previous posts here on this topic, but I still have some questions. First, I will tell you where I am sourcing the motor from, and where I stand at this point. So I have put down a $1,000...
  7. 05-06 jdm usdm cluster

    Exterior & Interior RSX
    05 rsx type s cluster with around 39,000 miles 100$ Jdm type r cluster with around 80,000 km 200$
  8. How to prefacelift 02 usdm

    The DIY Garage EP3
    Hey guys, I have a couple questions that I can't find the answers to, any help is greatly appreciated. What is needed For a jdm pre facelift to fit 02 civic si. I have the jdm bumper/lip/grill, both fenders, both headlights, hood and rebar. Will everything bolt up? Will the headlights work with...
  9. USDM Front end Conv to JDM

    Exterior Mods EP3
    I'm sure a lot of you have done it, but I'm looking for the ReBar for the front and rear.. Did you guys modify it yourself or did you buy the JDM version? And if so..Where? Help!
  10. sold pls close

    Exterior & Interior RSX
    For sale 05-06 tail lights. no broken tabs/cracks/scratches (might need to double check). no brackets included, but have my old rubber gaskets. I'd recommend changing them to new ones though. $150 picked up in San Diego, prefer local but willing to ship. of course buyer pays for shipping.
  11. sold pls close

    Southern California For Sale: Local Pick-Up
    For sale 05-06 tail lights. no broken tabs/cracks/scratches (might need to double check). no brackets included, but have my old rubber gaskets. I'd recommend changing them to new ones though. $150 picked up in San Diego.
  12. FS: K20a2 Transmission 6 Speed

    Southern California For Sale: Local Pick-Up
    80K miles out of a rear ended rsx type s. No grinds, popouts etc. perfect working order. 750 Firm No shipping. Pick up only in 626 area Prices Firm Text me 626 757 9101
  13. WTB: USDM OEM Front Bumper

    Exterior & Interior EP3
    Title says it All Dont Matter What Color it is
  14. Air duct on Usdm bumper?

    General Discussion EP3
    hey guys I was wondering if anyone ever modified their usdm bumper to have the air duct on it?
  15. usdm fog lights in JDM facelift bumper

    Lighting EP3
    I have a set of OEM usdm fogs I'd like to put into a JDM/edm facelift bumper. I've heard the actual housing is the same, but a JDM bracket is required. Is this true? Can you install these without getting a JDM plastic surround? Info appreciated! X-posted from ephatch for more exposure
  16. DIY: RSX USDM OEM Rear Emblems Rebadge/Install

    The DIY Garage RSX
    Hello RSX Enthusiasts, here I will show you how to rebadge the USDM 'Acura' and 'RSX' emblems back to the original look (or as close as possible). The Type S portion will be added on to this DIY real soon. Why do this? For any reason you want to re-install your de-badged oem emblems, you can try...
  17. question mugen lip with 04 usdm bumper

    Exterior Mods EP3
    I have hfp on my ep3, my front lip is messed up thanks to a flying duck :weeeeeeeeee: so yeah I really like the look of the mugen lip for the 02-03 buut I have an 04 usdm bumper. what do I need to do to make it work ?? Is expensive so I wanna make sure is possible
  18. FS: WHITE! Walker Front Lip, USDM Type R Front Lip, WHITE!

    Exterior & Interior EP3
    got my walker front lip for sale i got from TNAautosports 6 months ago, got proffessionally painted 4 months ago. Gives the ep a nice, clean look. Also got this USDM polyurethane Rear type r lip for sale, will be selling bumppers, they are champ white, if interested hit me up. Walker Front Lip-...
  19. type r wing nhbp modded for usdm ep3 250$

    Exterior & Interior EP3
    250 plus shipping , ctr nhbp wing modded for usdm trunk lmn 3399877496
  20. sold

    Exterior & Interior RSX
    one taillight is 9.5/10 and the other is 9/10 :coffee: Taillights *Only* NO broken tabs or any of that BS. Asking $250 Will Ship at buyers* expense!
Top