Search Results for ‘values’

the past 3 days ive been having trouble with my car. out of nowhere, it wont start anymore. i have tried many things like a brand new map sensor, checking the wiring, adjusting valves, ensuring timing is correct, cleaning IACV and throttle body, replacing throttle body gasket, confirming...

This weekend I finally decided to install my Kpro 4 ECU (ECU is a PND that was sourced at the time, and Kpro installed) into my EP3. I removed the ground terminal on the battery, then proceeded to remove my PRD ECU. I installed the Kpro'd PND ECU and re connected the battery. Pulled out a...

Maybe someone can clarify the issue for me. When I do a datalog in kpro I don't get any recorded lambda values in the tables section. This makes it hard for me to tune as I cant use the lambda overlay to adjust fuel. I have to guess at the percentages just by looking at the graph's A/F ratio. If...

I think i must be easily over looking something , but I have been trying to figure this out for a few hours now. When ever I go to my data log and try to see the estimated fuel adjustment values, they all come out blank, including my lambda values on the fuel tables. Am I missing something ? Or...

If someone would be so kind to open there Greddy TT and give me the values for Q6 and D4, that would be great. Got home Friday and as normal walked into my house (car in open garage) with car running on turbo timer. Then I noticed a few minutes later that my car was still running. I get in my...

I've checked out the beginners stickey already. When I upload my datalog, click view, then click lamdba it doesn't show what your air/fuel was at each column and rpm which I recorded... Is this normal? Kal is below

Below are the tables for dead times needed for the 1000cc and 725cc Injector Dynamics injectors. The tables are in milliseconds (ms) instead of microseconds(usec) which is the values needed for KManager. If you would like to download the pdfs version of these images just follow the links below...

Ok, so I had my tuner tuning on the dyno tonight and the actual values being used on ignition timing was about 12* less than was inputed. In order to get 25* ignition timing, we had to input 37*. As we would lower our inputs, it would lower what it actually did. We looked over all the...

Ok I spent 7hrs on the dyno today, got my low cam close, not perfect though, everything went somewhat fine, though occasionally the ignition values I plugged in wont appear changed on the datalog, but fuel adjustments would. When I switched to high cam tuning, ignition never showed as been...

I went to go tune my car for the winter today, and long story short I am using a friends laptop instead of mine. Ok the real question is that after I datalog and try adjusting the A/F, I re upload the map and go make another datalog. However after two or three runs nothing has changed when I...

I drove to the supermarket last night in the snow....no problem. When I went to get back in the car, it would NOT start....the engine was rough...then it would stall. I tried this a few times without success. Today I had the car towed to Acura and they are saying that I mis-shifted and the...

I searched for a good 20 minutes and couldn't find anything. Just curious as to what values you turbo guys are using for fuel and ignition compensation values. Thanks in advance ya'll.

I recently installed the e-01 in my rsx type s, with the greddy turbo and intercooler kit... my problem is that i unlocked the emanage and deleted all the values to the ignition map, injector map sub injector map airflow map boost limiter cut values and the vtec values... i was hoping someone...

What do the values in each table (ignition, fuel, cam) mean in the Kmanager? Tried searching but didn't find it.

I tried a search and no one seems to have any answers, so I figured I'd try to get this info from the fellow auto-xers in the bunch... Have any of you noted the camber and toe values from when you installed new springs (ie. - changed the ride height)? That is what were the values after you...