Acura RSX, ILX and Honda EP3 Forum banner
valve
1-19 of 500 Results
Advanced
  1. Problems & Solutions RSX
    So I was troubleshooting why my a/c keeps losing pressure after a week or so and I narrowed it to leaky O-rings in the expansion valve under the dash. I have my glove box and air box gutted to access this and sure enough the insulation over the evap pipe was soaked and I can see wet areas all...
  2. Problems & Solutions RSX
    Anybody have problems with the skunk2 valve cover hardware? On the install I broke 1 stud and three of the stainless screws while using their torque specs. I finally just went by feel and they started leaking. I have contacted skunk and they won't sell any of the stainless screws. Have to buy...
  3. Bolt-On Basics: RSX Type-S
    So I’m wondering if it’s ok to Put on one of those small filters or just run it open. The tubing won’t fit..I’m just wondering if doing this will harm my engine in someway
  4. Problems & Solutions RSX
    I was thinking to replace my Base integra DC5 PCV valve, the part i see online is 17mm valve but in my car the valve looks funny, it is round and looks different than the part number “17130-PND-A01”. Anyone got any clue?
  5. Want To Buy or Trade RSX
    What’s up looking to buy certain custom parts before I just go ahead and buy them new. Would love to find them here and not wait for them. Looking for: *Chrome valve clover (if it’s shaved and has the intake port shaved even better) *Valve cover hardware *Afternarket throttle body (if it has...
  6. Engine & Transmission RSX
    Sold
  7. Canada West: For Sale & Want to Buy
    Sold
  8. Problems & Solutions RSX
    I find that these are really the only tools you need to do the valve adjustment on the 02 Type-S. Its not terribly difficult. I'll expand more if there are any questions. Paul
  9. Problems & Solutions RSX
    So I was instaiiling my CAI a while back and the right side of the IAS came off with the original hose ?, I didn’t know what the hell it was and neither did anyone else, I superglued and quicksteeled it back on.... well I finally just accidentally stumbled upon it, and I also found a ktuned IAS...
  10. Problems & Solutions RSX
    Hey guys I'm having a problem with my 2002 rsx type s, hope you can help, Right now when I drive my car their is a slight fluttering noise and I'm pretty sure it's the butterfly valve making a very slight change jingling kinda noise coming from the engine when I rev up the engine. When it's...
  11. Problems & Solutions RSX
    What’s up club was wondering if can get some advice from you guys. Been struggling,looking for a valve cover gasket kit and wanted to ask you guys if you all had any suggestions on what to go with on my k20A2 and also where it is best to get the kit from for a fair price.
  12. Problems & Solutions RSX
    Got an engine light past couple of days ago. Went to Autozone to get what the error is: 38-1 Left Rear Outlet Solenoid Valve Malfunction. Could not find anything on the web regarding this error and how to solve it. Please point me to the right direction. Thank you.
  13. The DIY Garage RSX
    Been watching YouTube videos on this, trying to decide, heat gun? Or oven? Who has done this, what method did you use and how did it turn out
  14. Engine & Transmission RSX
    BOUGHT IT NEW FROM ICB MOTORSPORTS AND WILL COME WITH NEW OEM GASKET AND SPARK PLUG COVER $135 SHIPPED LOCATED IN ORANGE COUNTY CA 92672 ITS IN MINT CONDITION NO SCRATHES AT ALL TXT ME FOR MORE PICTURES 949-412-0647 [/URL]
  15. Exterior & Interior RSX
    FOR SALE ICB Motorsport Valve Cover Gunmetal NH-426M BOUGHT FROM ICB MOTORSPORTS IN MINT CONDITION $130 COMES WITH SPARK PLUG COVER AND OEM VALVE COVER GASKET SHIPPED TEXT 949-412-0647 LOCATED IN ORANGE COUNTY CA 92672 [/URL][/IMG]
  16. Problems & Solutions RSX
    I thought the noise my have been my timing belt but I found out that the Rsx's all have timing chains.. the noise is not constant but still doesn't sound right anyone have any ideas or a similar problem? Does a timing chain ever need to be replaced?
  17. Problems & Solutions RSX
    Hey guys I am looking for a little input. As some of you know I had to pull my supercharger and have it sent out to be rebuilt. At the same time I had a broken valve cover bolt (front right if looking at the motor). I replaced it and torqued it to spec. Afterwards I noticed a valvetrain noise...
  18. Turbo RSX
    Hi guys, Not here to debate which one is better. I was trying to buy Supertech H1021D Kit (Dual springs, retainers and seat) to fit into my K20A3 RSX 2002 base model. The supplier then replied that supertech kit won't work and suggested me to get Supertech M1007D/K2 instead. I have searched on...
  19. Southern California For Sale: Local Pick-Up
    Please Close
1-19 of 500 Results
Top