Acura RSX, ILX and Honda EP3 Forum banner

w or pics

  1. Problems & Solutions RSX
    I have an 02 RSX type S with water on passenger floor board but it does not feel or smell like coolant. Nor is my coolant level low. However i do have all the tell tail signs of a heater core leaking... Water on the floor under the HVAC box and windows fog easily, but could it be anything else...
  2. Bolt-On Basics: RSX Type-S
    I bought this car off auction so its not like i could ask what company its from. Is it the stock header or what? Also, is there a place where i can look to see a stamp? And where should i be able to find the name of the exhaust cause it doesnt say on the tip. <a...
  3. Engine & Transmission RSX
    Soon to be listed: BNIN AIS Trunk Mount Meth Kit w/SS Lines, Dual Nozzle SS lines, 4 Extra Nozzles RSX JRSC Inlet EP3 JRSC Manifold and Inlet Payment must be made through PayPal and the buyer is responsible for the 3% fee unless you send the money as a gift. I've sold a lot of parts here and...
  4. Problems & Solutions RSX
    Delete
  5. Wheels & Tires RSX
    up for grabs is my set of four 18x7.5 mugen gps The good no bends and no cracks ! Comes with tires,center caps, valve stems and caps lots of tread life on the tires, they are 225/40/18 nankangs The bad.. two wheels have a minor one inch rash other than that everything is fresh ! On to...
  6. Engine & Transmission RSX
    Comes with everything CD, Cable, box, harness and o2 sensor which is practially brand new, it has less than 5000 miles of it. Also would need to trade for your stock o2 sensor. $1200 shipped and will have pics uploaded today. o2 sensor is still on the car. I took kpro out just so I could get...
  7. Wheels & Tires RSX
    +40 offset 225-45-17 Falken fk 452 on front with 95% tread 225-45-17 Yokohama s drive on rear with 70% tread Rays blue valve stems - have one additional spare Rays duralumin lugs Volk flat center caps Will sale $ 2000 OBO or TRADE for NONSTAGGERED WHEELS ONLY! (SSR type-F, work vs-xx or...
  8. Exterior & Interior RSX
    I am leaving the country soon and would like to clean out some odds and ends that I no longer have a need for: 02-04 Projector headlights (w/o lenses, angel eyes removed) passenger side fender tab is broken: I used the lenses from these on my retrofits. OEM headlight lenses in good...
  9. Suspension & Brakes RSX
    Here's my previous thread that I updated with pictures. PM me if your interested, thanx!! http://forums.clubrsx.com/showthread.php?t=776031
  10. The DIY Garage RSX
    "Had the stuff boxed since late December 2010, and finally got around to installing. TO PROVIDE CLARITY AND ELIMINATE MOST QUESTIONS SURROUNDING INSTALLING THE A-SPEC OR TYPE R SPOILER." So I read a thread and it seemed like I had to remove the plastic trim from underneath the hatch. Big WTF NO...
  11. Member Show-Off RSX
    Fall update: Finally got the transmission problems figured out in June sometime. Had to send the transmission to speedfactory to build it. Works great now. Only problem is 4th pops out every once in awhile while decelerating. Not sure why, but rarely happens. Had fun with the car the rest of...
  12. Engine & Transmission RSX
    Ahead of time I would like to apologize for posting this before hand and not being actually ready to sell. So SORRY to anyone that was interested , the timing was very bad. Anyways on to the sale.... Price: $850 with stock 02-04 Type S ecu. Location: Houston Tx WILL NOT SHIP!!! Will meet...
  13. Canada East: For Sale & Want to Buy
    Selling a few things for an 02-04 Rsx + some misc items Location: Markham Contact: 416-707-0747 (No PM's please, as im not on the boards too often) 2. Selling an 02-04 RSX CAI. Just the pipe, no filter, no washer bottle & no hoses. Looking to get $45.00 3. Selling a set of stock black...
  14. Engine & Transmission RSX
    Price droped from 650 to 550 on the Comptech Race header.. Race header plus adpater= $650 B-pipe "NEW"- $280 650CC INjecters- $220
  15. All Motor RSX
    Just received my Megan racing race header. One thing i couldn't find when deciding to buy this header were some really good pics to make some judgement so I went ahead and did that for you guys. The only thing I'll add to this thread when I install is how it installs, I unfortunately do not...
  16. Problems & Solutions RSX
    So I just got a replica Mugen front strut bar off ebay. But it looks like I have some minor fitment issues. The bar is rubbing up against two of the hoses (don't know what each hose is for, so I took pics). Anyway, I hear a clanging noise when I step on the gas or brake, so I'm guessing that's...
  17. Bolt-On Basics: RSX Type-S
    UPDATED-Installed Fujita CAI w/pics and vids-UPDATED Alright, just got my Fujita CAI and installed it last night. It took me around 2 1/2 hours all together. A few places that might have been mentioned before to watch out for...leave it in 5th gear. I forgot too and while about to drive off for...
  18. Suspension, Chassis & Brakes
    i decided to create a different thread because of the big ass pics and i didnt 5k owners to get owned. but heres a recap of my problems.. heres the previous thread.. http://forums.clubrsx.com/showthread.php?p=9860960#post9860960 wheel gap picture of the pillowball mount setting picture of...
  19. Suspension, Chassis & Brakes
    Here is what the drop looks like after a little over 2 weeks. The roads here are not great, and so the suspension is a bit firm, but by no means harsh. Body roll is diminshed, and my confidence in hard turns is much improved. Front gap is three fingers, and rear is a tad over two and a...
  20. Turbo RSX
    Simple, sweet, and to the point -remove intake manifold -remove the bottom plate held on by 6 screws -drill and tap to whatever size you desire AS CLOSE TO THE THROTTLE BODY AS POSSIBLE!!! -reassemble in reverse order heres a pic do not make multiple taps...one is enough to drive everything...
Top