Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 24 Results
  1. Exterior Mods EP3
    so i recently picked up a '04 EP3 that my friend used the front end for parts, i bought it with intentions of building it back and having a sweet little track car. most of the rad support is missing, i have found a full one im just wondering if its weld on or if its bolted in. i would look but...
  2. Forced Induction & Nitrous RSX
    ALL PRICES ARE SHIPPED! More Pics if Needed Prosport Oil Sandwich $25 Acura RSX aluminium oil pan with welded on an bung ( -10an)for oil return line. $150 Fast turbo Lines New $75 Omni Sport 2.5 Bar Map New $35 Magna Flow 2.5inch High Flow Cat Brand New $65 Precsion Steel...
  3. Bolt-On Basics: RSX Type-S
    I am looking for a race header that I can get a cat welded on to. I was wondering if anyone had experience with doing this. Would the fit still be perfect if I had the long pipe cut off to the length of the cat and re welded on? Also: I have a borla cat-back and was wondering if putting a header...
  4. Bolt-On Basics: RSX Type-S
    So I recently tore my front mount and band aided the problem by getting esmm. After the esmm, the cabin noise is killing me. I can barely hear the radio while idling. I was wondering if I fill the stock mounts with window weld, would it vibrate and transmit less cabin noise. Main point: what...
  5. Suspension, Chassis & Brakes
    So I'm working on a buddies Civic SI and one of the things I'm doing for him is the ol' window weld motor mount trick. I'm installing a Race Header and he doesn't want to buy full mounts.... Anyways, my subframe is just lying on the ground as always and as I walked past it I had a thought. Has...
  6. Welding, Fabrication, & Tools
    I purchased a Greddy Evo2 for dirt cheap, and it's missing the flange connecting the Cat to the B pipe. I was just wondering if this is an easy fix? I'm assuming that a local exhaust shop that does custom work could handle this easily.
  7. Supercharging RSX
    When i remove the blower, after replace the ball bearing and after ported them, i want to plug the discharge ports with the JB weld because weld with a TIG solder can damage the housing of the rotor. Anyone have try to plug this discharge ports?? The JB weld compound is this ...
  8. Welding, Fabrication, & Tools
    saw a Vibrant Flex Exhaust Tubing ( 2.5" I.D. 4" Long ) on crsx for 44 bucks. need to repair my stainless dcrh cracked flex pipe. Is this the right part for it since dcrh are 2.5 diameter?
  9. Problems & Solutions RSX
    So I had a coolant leak somewhere so I used a coolant pressure tester and sure enough my radiator is leaking from the top where you see the bubbles. Would it be possible to just JB Weld that top section?
  10. North East
    I need my oil pan tapped and welded for my turbo return line. Is there anyone in the south jersey area that can do this kinda work for me?
  11. Welding, Fabrication, & Tools
    So i was looking into getting into welding. My uncle gave me a free lincoln eletric weld pak 100. What do i need to upgrade it to a MIG welder and anyone have any basic tips to get started? thanks
  12. Problems & Solutions EP3
    My boss said he could get it done for $60 cash but is that a good deal?
  13. Problems & Solutions RSX
    I was driving home making a turn and down shifted into 2nd and never made it into gear. The weld broke right down the middle I guess it was cracked under the paint, because I looked it over really well when I took it out of the box. I just bought it last month on the 16th. I have contacted...
  14. Forced Induction & Nitrous RSX
    I have "4" extra size 10an aluminum weld bung to tap the oil pan. all brand new ready to ship. 6bucks shipped.
  15. General RSX Discussion
    I have never used this stuff but was wondering if it is easily sand-able so i can smooth out the surface of the JB weld after it has been applied and had time to fully set. need to some repair something in her garden for my mom and wanted it to look nice afterwards. thanks
  16. All Motor RSX
    Well I bought a Titanium axle made by Pro Spirit JDM. The collar is broken in half. Hence I won't have any choice but to get it welded. Now, how hard is it to weld Ti to Stainless...if that's possible? Pat
  17. Turbo RSX
    for the fitting on for the oil return.. better to weld the oil pan (type s aluim) OR just honda bond it or with some ultra grey? think i know the answer just want ot know for sure
1-19 of 24 Results