Acura RSX, ILX and Honda EP3 Forum banner
wideband
1-19 of 180 Results
Advanced
  1. ECU Tuning RSX
    Searched, but couldn't find the answer.. I'd like to know if the stock '04 RSX TypeS psuedo wideband 02 sensor is suitable for tuning a supercharged engine running E85? It was recommended to use the stock sensor since it is wideband and the ECU is a PRB K-series one, so...sort of plug and play...
  2. Problems & Solutions EP3
    Ok guy, so this is my problem. My car is a Ep3 civic usdm (sir) 2004. In my search I have found that car run on wideband system. And, recently I have buy a lot of stuff from a UK Ep3 type-r. Apparently the UK system is on narrowband so when I have put the ecu... The car show me a cell code. I...
  3. ECU Tuning RSX
    I know I have to connect the wire from wideband to ELD wire. Now my question is do I just tap into or completely cut it off? If I completely cut it off to which end I connect the wire coming from the wideband? The ELD wire is the wire w/ green tape on it in the pic above. Any help is greatly...
  4. ECU Tuning RSX
    Attempted to weld in an O2 sensor boss and discovered three very important things: 1. The down pipe is actually dual wall; to do this right you have to drill thru both, weld the bung into the inner tube, then weld the outer tube to the inner to seal that air gap 2. There appears to be a wall...
  5. Car Audio, Security, & Electronics RSX
    Part #30-4110 Watsup clubrsx I just purchased the gauge and sensor combo to setup with kpro for data logging, tuner requested it said stock o2 wasn't good...Looking to clear up how to wire the gauge to kpro? I came across some good info on xenoncron that I'll post a pic of.. Saying the power...
  6. Problems & Solutions RSX
    Hey, I've had a AEM wideband stored for installation for almost 7 months now due to not knowing where to pass the sensor through. I already have the little plug in my exhaust made, currently sealed with a screw. Im just wondering if there are any threads out there on how to install a wideband on...
  7. ECU Tuning RSX
    So I have decided to ditch my primary 02 sensor and run off my mtx-l, I wired it up to analog 0 now I just need to input the 02 voltage/A/F ratio but not sure of what values to use so I can program the mtx-l. One more thing, engine won't start if the primary 02 sensor is disconnected, am I...
  8. ECU Tuning RSX
    Factory wideband running at 13.5 vs lc2 at approx 14. Pretty sure I should ignore stock sensor and trust lc2. ???
  9. Car Audio & Electronics EP3
    just as tittle says i got my AEM EMS v2 standalone plug and play w/ wideband BNIB -2 sensor for 1100 FIRM. willing to ship at buyers expense. LOOKING TO TRADE FOR KPRO! v3+
  10. The DIY Garage RSX
    I'm stumped on how to do this but a DIY would greatly help out. I know someone has done this before on a dc5. Mine is a RHD DC5R. Also, pics of where you have your gauges located would be nice.
  11. Southern California For Sale: Local Pick-Up
    7)rear hatch shock absorber $5 https://m.flickr.com/#/photos/[email protected]/16492059222/ 8)clutch and brake pedal cover $2 https://m.flickr.com/#/photos/[email protected]/16379886007/ https://m.flickr.com/#/photos/[email protected]/16379537039/
  12. Southern California For Sale: Local Pick-Up
    Sold https://m.flickr.com/#/photos/[email protected]/15043139501/ https://m.flickr.com/#/photos/[email protected]/15023235896/ https://m.flickr.com/#/photos/[email protected]/14859671717/
  13. Interior Mods RSX
    I just want to know what are good digital water temp and air fuel gauges. Can you guys recommend any?:thumbsup::baby:
  14. Turbo RSX
    Hey guys, I'm wondering if anyone has hard wired their wideband directly to Kpro? This is the wideband that comes with a UEGO or Prologger, and I was just wondering how people have wired it. I'm sure you have to scale the voltage in the Kpro, but is there any signal conversion needed for the...
  15. Engine & Transmission RSX
    That sold fast :rotfl:
  16. ECU Tuning RSX
    Car is going to be getting dynotuned the guy tuning my car wants my wideband run into kpro so he can see how the Afr is on a table at certain points in the tune. Anyone ran your wideband into your kpro and know exactly whats going on?
  17. ECU Tuning RSX
    If I got a wideband O2 sensor like an Innovate MTX-L can it replace the OEM primary O2 sensor? Or does the wideband just serve data logging purposes and cannot actually feed the ECU the data?
  18. Problems & Solutions RSX
    I am looking for some advice. I just finished up rebuilding my motor. I went from a stock k20a2 to and ERL built 2.1L turbo block (88mm pistons with 9.0:1). I also installed an RBC intake manifold with a hondata gasket and a 70mm throttle body. I started up the motor and it started up really...
  19. ECU Tuning RSX
    As the title states... I have an 02 rsx type S. I'd like to know if there is an aftermarket wideband gauge that will read or connect to the primary oem wideband o2 sensor. I also have Kpro. Not sure if that gives me an alternative to make it work. I plan to use the stock wideband and run...
1-19 of 180 Results
Top