A/C Air Conditioning Removal

59963 Views 46 Replies 30 Participants Last post by jimmyarriaza10, 3 mo ago

Hercules

Discussion Starter · Jan 17, 2010 (Edited)

Whats up guys, i just got my rsx-s runnin a couple weeks ago. I aquired it with a locked up engine and rebuilt it. Well i decided not to reinstall the a/c when i put the motor back in and searched for a while on which belt size to get and came up with no luck at all.
So i figured it out myself and found a 6 rib belt thats been working great.
Its from autozone - Duralast 537k6 is the size
That is for the k20a with power steering but no a/c
A k24 would be different due to different crank pulley size.
Just wanted to share this info with this site for anyone that wants to take their a/c out!

Save

Reactions: 1

1 - 2 of 47 Posts

hadtstec

· #36 · Apr 19, 2015

There is an OEM Honda Belt you can use for this:
Part Number: 31110-PRC-023
Not the cheapest though at $83

Here is a video of the Belt
https://www.youtube.com/watch?v=JokYqEC23xs

Here is a video of the Belt fitted
https://www.youtube.com/watch?v=fou4ixmeNa0

Save

hadtstec

· #38 · May 13, 2015

Justinmv24 said:
ordered that expensive belt and it doesn't even fit. it is about an inch to short

As you can see from the Video the Belt does fit. However I only found out later that you need the smaller Crank Pulley to make this belt work, which I believe is (13810-PRC-003)
I have bought one an will update my post once I've received it and can verify that it fits and resolves the problem.

Save

1 - 2 of 47 Posts

Top Contributors this Month