[JMBare]

I am spraying water into my intake for a reason.

Hey Sonny, I don't remember seeing an update on this one... How is the water injection working out for you? Are you actually seeing lower Intake temps?

Have you had a chance to dyno before and after?

Sorry if you posted this somewhere already, I missed it somehow.

See ya,
JMS

 

[JMBare]

No temp drops that I have noticed, of course the ECU doesn't measure after the S/C but before.

I hadn't realized you guys left the AIT sensor in the intake pipe...

You should consider installing an OBD 1 sensor into one of the intake rails, to allow the ECU to accurately adjust for Intake temps. However, temps are probably linear with the supercharger, so an increase in intake temp, may directly indicate a linear increase after the charger.

But still, When I did my 99' si, there was no place in the turbo's charge pipe for the AIT sensor, so I instaled an OBD 1 sensor into the intake, and it worked beautifully. This allowed me to get an accurate indication of actual intake temps.

See ya,
JMS