Acura RSX, ILX and Honda EP3 Forum banner

1 - 8 of 8 Posts

·
TeH Brown Ninja Turtle
Joined
·
1,238 Posts
Discussion Starter #1 (Edited)
I ran at 8-8.5psi with full interior and 2 amps and with 205/55/16 azenis all around with 26psi in the front tire pressure...i launched at aruond 3500 and just dropped the clutch and i really dont know how to feather the clutch all to well yet but thats something i wanna try next...i got in 3 runs which were real consistent and ill post all three...

1st run
R/T -- .7917
60ft -- 2.3181
1/4 ET -- 13.7869
1/4 MPH -- 103.69

2nd run
R/T -- .5819
60ft -- 2.3983
1/4 ET -- 13.7833
1/4 MPH -- 103.93

3rd run BEST
R/T -- .7642
60ft -- 2.2508
1/4 ET -- 13.7525
1/4 MPH -- 106.79

my 60ft was real crappy(i think) bc when i would shift from 1st to 2nd i would think its time to shift but it really wouldnt be because the tach would be off due to the tires spinning, i guess thats were learning how to feather the clutch will play a huge role...i cant post the actual slips bc i dont have access to a scanner here on campus at least i dont think i do...and does anyone know what kind of quarter mile my trap speeds should get me??...
 

·
Registered
Joined
·
515 Posts
you should invest in some drag radials. it'll help you lower your 60' times to 2.0's. That should put you in the 13.5 - 13.4 range.
 

·
Registered
Joined
·
4,474 Posts
lucky_317 said:
you should invest in some drag radials. it'll help you lower your 60' times to 2.0's. That should put you in the 13.5 - 13.4 range.
Look whos posting on clubrsx now. :wavey:
 

·
TeH Brown Ninja Turtle
Joined
·
1,238 Posts
Discussion Starter #4
does anyone make drag radials for the stock rims?...if not stock rims, are there any 16 inch rims that would fit drag radials?...
 

·
New car again...
Joined
·
5,092 Posts
Hey Junaid, I borrowed Ramon's Nitto DR for the track once...size was 205/45/16.

He has them for sale if you are interested...let me know. :)
 

·
Registered
Joined
·
515 Posts
I been here for awhile I jost don't post much. lol
 

·
Banned
Joined
·
6,512 Posts
Inprogress2 said:
I ran at 8-8.5psi with full interior and 2 amps and with 205/55/16 azenis all around with 26psi in the front tire pressure...i launched at aruond 3500 and just dropped the clutch and i really dont know how to feather the clutch all to well yet but thats something i wanna try next...i got in 3 runs which were real consistent and ill post all three...

1st run
R/T -- .7917
60ft -- 2.3181
1/4 ET -- 13.7869
1/4 MPH -- 103.69

2nd run
R/T -- .5819
60ft -- 2.3983
1/4 ET -- 13.7833
1/4 MPH -- 103.93

3rd run BEST
R/T -- .7642
60ft -- 2.2508
1/4 ET -- 13.7525
1/4 MPH -- 106.79

my 60ft was real crappy(i think) bc when i would shift from 1st to 2nd i would think its time to shift but it really wouldnt be because the tach would be off due to the tires spinning, i guess thats were learning how to feather the clutch will play a huge role...i cant post the actual slips bc i dont have access to a scanner here on campus at least i dont think i do...and does anyone know what kind of quarter mile my trap speeds should get me??...
Can u post your 1/8 mile times?
 

·
New car again...
Joined
·
5,092 Posts
check the timeslips thread, it's in there.
 
1 - 8 of 8 Posts
Top