check this out for a fuel system 2002 ep3 k20a2 gt3076r 500+whp.
I didnt have to sump the tank so far almost 200 miles no issues.
Very simple fuel system.
the pump-weldon 2025 -8 in and -8 out
plus side: all fuel compatibility.
down side: loud as hell and pricey, no fuel level anymore(tryin to fab something up though)
I had to re install the rear interior its so Fucxxxx loud.
-8 from tank to pump then pump to rail.
-6 return ( cause it was already done in -6)
fuel lab filter in front of pump.
1600cc inj
aem inj driver
fuel lab regulator
golden eagle rail
Tuned By Tony Palo.
sorry for the 2 crappy pics.
I did end up re routing the top feed hose underneath the pump.
I also ran the pick up directly over the top of the tank (not around like pictured) so its only like 4.5ft long and no walbro sock, weldon said thats a no no.
you have to run a very short return due to the flow of the pump. No lean cuts so far. 22-23 psi
Good for about 700whp on e85 and 1400whp on c16 So I was told.
Thanks to Philip from Race-lines.com
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
Acura RSX, ILX and Honda EP3 Forum
A forum community dedicated to Acura RSX, ILX and Honda EP3 owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, K24 swaps, turbo kits, and more!