dc5 type R stock exhaust size
1 - 3 of 3 Posts
I tried searching but apparently I suck at it.
Joined
·
39 Posts
Can I bolt on a type r muffler on my type 06 exhaust ?
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Skunk Stage 2 tuner cams. Nothing but problems!
All Motor RSXI built a K24 with an A2 head. I installed Skunk 2 stage 2 tuner cams, Skunk 2 valve springs, Skunk 2 Titanium retainers, Skunk 2 tensioner. All these Skunk parts were brand new. The timing chain was a brand new K24a2 chain. I put 900 miles on the engine and now I'm having bad chain slap and...- 0
- 36
-
K24 RSX-S running lean
All Motor RSXHey guys, I am new here but I have a 2002 RSX-S with an 04 k24a2. I've changed my map sensor, tps, and o2 sensor but the car afr goes from 16 to 20. Ive also checked all my vacuum hoses (i am running an rbb intake manifold) and they are fine. Yes i have kpro Help Please!!!- 6
- 892
-
Spoon 70mm Throttle Body!
All Motor RSXJust received my Spoon throttle body which is bored to 70mm on the inlet and tapers down to 64mm on the outlet side. This is essentially a brand new throttle body with all sensors included. The only reason I got this was because it was the same price (roughly) as an OEM throttle body and I was...- 10
- 6K
-
RSXDC5 · updated
-
N/A K-Pro Calibrations
All Motor RSXK-Pro(stock calibration), INJEN CAI (club RSX ed.)- 1K
- 266K
-
tedmaneight · updated
-
K20z1 Intake Cam Only?
All Motor RSXLet me start by saying I’m no nub, even though I feel I know the answer I’m unsure. I have a opportunity to purchase a k20z1 intake camshaft w/ the VTC gear. I tried searching and did come up with some helpful information but I just need things to be clear. Should I go ahead and get the exhaust...- 13
- 2K
Join now to ask and comment!