Acura RSX, ILX and Honda EP3 Forum banner

Do you like how this looks?

  • Yes

    Votes: 9 75.0%
  • No

    Votes: 3 25.0%
1 - 7 of 7 Posts

·
Registered
Joined
·
429 Posts
Discussion Starter · #1 · (Edited)
Anyone who likes how the running lights on the IS300 look, might like this. This is the way I chose to do my city lights. Do what will with it.

Enjoy!! :thumbsup:

The link is a zip file below.
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #7 ·
geogerf said:
city lights are old school, but i have to admit they still look good... i'd prefer a blue/purple color...
Yes I did that on my old Accord. I was going for consistantcy in light color red interior/exterior.
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #9 ·
TrustRSX said:
Thanks for the nice write-up!

However, I'm not giving up high beams.
I drive in the city most of the time, but sometimes I do highway driving. That is why I keep the high beam lights in my car. If I need them (turnpike, highway) I can pull over and put them in. Nothing is done in this DIY that disables the use of the high beam permanently. The plug is still there and functional. Just switch them out as needed.

:thumbsup:
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #11 ·
s8n said:
I dont understand. What is the purpose of city lights?
There is no perticular function beyond looks. Just like there is no pupose to bright white lights, JDM style headlamps, or JDM rear wing. Its all for looks.
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #17 ·
TrustRSX said:


Well, it's just an extra step. Granted the high beams are easy to change, it's a hassle.

Don't they make a kit that allows you to install the light underneath the existing bulb?
Yeah, not too much hassle since I would only have use for them like once every 2-3 mo. Even on the highway there are always other cars coming. Thats jsut me tho. I will go that xtra step to make my car look different than the rest in town.

I am not aware of a kit like this for the H1 bulb. There is no room for anything else to penetrate the cavity. I mean, I had to shave a bit off the opening just to fit the little 168/194 bulb in. That is small.

You can tell on the pic. below there is no room to add to the H1 opening. That hole to the side is a vent and I don't believe it is open to the back of the housing. I wouldn't want to close off a vent either. Keeps moisture out.

:thumbsup:
 

Attachments

1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top