[HrtMyHnDa]

Bump!!!!

 

[HrtMyHnDa]

Bump Again!!!

 

[HrtMyHnDa]

So what do you still have?

Text you :thumbsup:

 

[HrtMyHnDa]

Up Up Up!!!

 

[HrtMyHnDa]

I am also curious as to what you still have, I need block, crank, well pretty much everything from headgasket down

I still have the block, crank, pistons/rods, oil pan and headgasket and some other smaller stuff, oil pump guides and stuff I can throw in.

 

[HrtMyHnDa]

whats the bore size on the pistons? is there a number stamped anywhere on the pistons? I'd need to find out the valve relief

They're 87.5

This is the Specs from the Box:

K634M875 (On Box) or 6634M875 (Stamped on the pistons)
Honda K24 w/ K20 Head +5cc 12:5:1
Comp. Ht 1.1810
Bore 3.4449
073108/M/P/2196

 

[HrtMyHnDa]

Bump!!

 

[HrtMyHnDa]

Bump!!

 

[HrtMyHnDa]

Bump!

 

[HrtMyHnDa]

Bump this!!!

 

[HrtMyHnDa]

Bump!!!

 

[HrtMyHnDa]

Bump!

 

[HrtMyHnDa]

Bump!!!!

 

[HrtMyHnDa]

so the pistons ARE shelf pistons... fyi valve reliefs are .235" intake & .170" exh

$450 is a bit much for used pistons since they can be bought new for less. is there any wear on the skirts? kinda looks like it from the pics

No, these are not shelf pistons, and these pistons are out of stock.

http://www.wiseco.com/Catalogs/SportCompact/AcuraHonda.pdf

It's the K634M875 Kit, though most say the Comp ratio is 11.0 mine are 12:5:1, scroll down to where it says K24/K20 head

Just got off the phone with Wiseco and the Intake pocket is cut at 38.6mm and the Exhaust is cut at 33.5mm

 

[HrtMyHnDa]

Bump!!!

 

[HrtMyHnDa]

Bump!!! Need this stuff gone guys!!!!

 

[HrtMyHnDa]

Bump

x2

 

[HrtMyHnDa]

Bumpy! Will cut a deal if you take all!!!