[HrtMyHnDa]

Bump!!!

 

[HrtMyHnDa]

Bump!!!!

 

[HrtMyHnDa]

Bump Again!!!

 

[k24coupe]

So what do you still have?

 

[HrtMyHnDa]

So what do you still have?

Text you :thumbsup:

 

[HrtMyHnDa]

Up Up Up!!!

 

[gtr500r]

I am also curious as to what you still have, I need block, crank, well pretty much everything from headgasket down

 

[HrtMyHnDa]

I am also curious as to what you still have, I need block, crank, well pretty much everything from headgasket down

I still have the block, crank, pistons/rods, oil pan and headgasket and some other smaller stuff, oil pump guides and stuff I can throw in.

 

[6spd_EK]

whats the bore size on the pistons? is there a number stamped anywhere on the pistons? I'd need to find out the valve relief

 

[k24coupe]

Bumping

 

[HrtMyHnDa]

whats the bore size on the pistons? is there a number stamped anywhere on the pistons? I'd need to find out the valve relief

They're 87.5

This is the Specs from the Box:

K634M875 (On Box) or 6634M875 (Stamped on the pistons)
Honda K24 w/ K20 Head +5cc 12:5:1
Comp. Ht 1.1810
Bore 3.4449
073108/M/P/2196

 

[HrtMyHnDa]

Bump!!

 

[HrtMyHnDa]

Bump!!

 

[k24coupe]

I think .245 intake .177 exhaust for the valve relief

 

[HrtMyHnDa]

Bump!

 

[HrtMyHnDa]

Bump this!!!

 

[HrtMyHnDa]

Bump!!!

 

[HrtMyHnDa]

Bump!

 

[HrtMyHnDa]

Bump!!!!

 

[6spd_EK]

so the pistons ARE shelf pistons... fyi valve reliefs are .235" intake & .170" exh

$450 is a bit much for used pistons since they can be bought new for less. is there any wear on the skirts? kinda looks like it from the pics