Acura RSX, ILX and Honda EP3 Forum banner

FS - Matrix Civic K20 swapped AS IS

3K views 20 replies 10 participants last post by  JDM_ES1 
#1 ·
FS Item(s) Description:
Perfect for someone who wants to do thier own customization or paint. I was clipped on the driver rear by someone trying to merge into the left turn lane. Please email for pictures. I had taken the car to MS autobody in Markham and they had quoted $1500 for parts and labour. I still have my stock parts such as front and rear bumper, seats, steering wheel with airbag, hood and trunk which will also be included. Dyno sheet will also be provided. Vehicle will come with safety and e-test. Body has 144,000km and motor was put in 19,000km ago. Stored inside the garage from November to May every year.Heres a list of what's done and will be included.

2003 Honda Civic Si Coupe original owner

Exterior
- ViS fiberglass kit
- ViS carbon fiber trunklid
- carbon fiber hood with sparco hoodpins
- original body parts included

Interior
- Sparco Fighter seats with Sparco frame bracket and sliders
- Sparco 3-point harnessess
- Sparco Mugello steering wheel with Momo steering wheel hub
- Autometer A-pillar 3 pod holder with Autometer guages
- Pioneer AVIC-N4 Navigation head unit
- S2000 shift knob
- Carbon fiber interior trim accents
- Megan B-pillar brace
- Compustar 2-way pager alarm
- OEM seats and steering wheel included

Engine
- K20A2 Type-S engine and transmission
- Hondata Kpro ECU
- DC5 Type-R LSD
- DC5 Type-R Final Drive
- Exedy Stage 1 clutch
- Exedy lightweight flywheel
- ARC Super Induction Intake Air Box
- BuddyClub Racing QuickShift Shiftbox assembly
- TODA Racing Camshafts
- Skunk2 valve train
- TODA chain tensioner
- Baffled oil pan
- Hondata manifold gasket
- DC Sports Race Header
- DC5 Type-R exhaust
- Optima redtop battery
- Hasport engine mounts
- Nology carbon fiber spark plugs cover and intake manifold cover
- Blue black powdercoated valve cover
- Tein hood dampers
- Greddy coolant reservoir bottle
- Mugen oil and radiator caps

If you are familiar with K series tuning in the GTA, the motor was built and tuned by Kenneth Lau (Turtle). Im sure ive missed a lot of internal engine mods which I can find out once he's back from Hong Kong.

Suspension
- RSX Type-S 5 bolt front and rear disk brake conversion
- Tein SuperStreet coilovers with upper pillow mounts
- Honda A-Spec front and rear slotted rotors and brake pads
- Edelbrock stainless steel brake lines
- Neuspeed upper front strut bar
- Neuspeed X-Brace subframe cross brace
- DC5 Type-R 22mm rear sway bar and links
- DC5 Type-R front sway bar and links
- Ingalls camber kit
- 17x7.5" Volk Racing CE28N on 215/45/17 Yokohama AD08's (wheels were powdercoated and tires mounted in April. Drove on them for 5 days until the accident. There is no damage to the rims or tires). Volk Racing Time Attack centercaps and valve stems included.
- Rays Engineering blue extended lug nuts
- H&R Extended wheel studs

Since the accident ive peeled off all the stickers off the body so it can be ready for repaint and repair.

Asking Price:
- $13,000 but open to legit offers

Location:
- Scarborough

Contact:
- 647-297-3088 or timothyshing@hotmail.com
 
See less See more
Discussion starter · #7 ·
Ill keep everyone informed if I do part out but only if I have a buyer for the car with motor and 5bolt as I would no use with a civic shell.

Eric, I thought you already had a cf trunk? I still have my stock trunk so I wouldnt need to swap
 
Discussion starter · #14 ·
To be honest, I dont have the time anymore to work on the car so I wouldnt pull the motor out. I had been speaking with another member with a 7gen about trading cars if thats something you are interested in depending on the km and condition of your vehicle. That way we dont need to waste money to have a shop pull the motor out and put it in the same car.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top